-
Content Count
1,851 -
Joined
-
Last visited
-
Days Won
14
Posts posted by Admin
-
-
Hi!
Your original firmware cannot be downgraded to earlier versions, and our chipless firmware is an earlier version. Basic concepts of the solution: - Standard InkChip firmware. Chipless firmware, which must be loaded into the printer using Firmware Mode. - 99 InkChip firmware. Chipless firmware, which must be loaded into Normal Mode. - Firmware Mode - special mode for updating printer firmware, which is activated when a certain buttons combination is pressed. - Normal Mode - normal mode of operation of the printer, simple switching on the printer with the power button.
Algorithm for solving the problem:
1. Check and memorize the firmware version of the printer. The firmware version displayed is the original non-update version.
2. Flash printer 99 with InkChip firmware in Firmware Mode.
3. When trying to activate the firmware with the Activation program and the activation code, the program will generate the Reading failed 1.
4. Start flashing the printer 99 again with InkChip firmware in Firmware Mode. When the firmware status in Firmware Mode reaches 100%, and the printer display finishes counting the percentage of the firmware status, you need to pull out the power cable of the printer.
5. Connect the power cable and turn on the printer. Recovery Mode will appear on the display.
6. Flash the printer with Inkchip firmware in Recovery Mode.
7. Check the firmware version of the printer. The firmware version displayed must be different from the non-renewable firmware version. This version is the chipless firmware version of InkChip.
8. Activate chipless firmware with the Activation program.https://inkchip.net/download/INKCHIP.net_Firmware_99_XP430_v1.rar
This is just an example of a process, it doesn't matter what model of printer you have. Please watch the video on our official YouTube channel:
https://www.youtube.com/watch?v=h7qWYWjMNFQ
And after that just ran again the inkchip firmware upload in normal mode. -
Hi!
After installing the firmware you should activate it with the key. Did you manage to do this successfully?
-
Hi!
10060 error means problem with internet connection, check your internet. The launcher is unable to update or communicate with the server. Disable anti-virus or use another internet.
-
Hi!
You must install the firmware in normal mode.
To install the firmware in normal mode means to use only the power button.
Watch this video please:
Here’s the new firmware:
https://inkchip.net/download/INKCHIP.net_Firmware_99_XP640_v1.rar
After that try to activate again.
-
Hi!
Please contact our support team via this email: support@inkchip.net
Tell them your order number, they will check your key.
-
Hi!
Send me the screenshot please. Have you inserted the key correctly? Without spaces before and after?
-
Hi!
What does the program show when you try to activate? Send me the screenshot please.
-
Hi!
Send me the screenshot of the error please
-
On 3/9/2022 at 8:40 PM, Jessicalopp said:I'm having the same problem with mine I have a xp-4105
Hi!
Is your internet connection stable? Try to reinstall the activation program, disabling the antivirus before.
-
Hi!
This model isn’t supported by the WIC solution, it cannot be reseted. We only have Chipless firmware for your model.
-
On 2/26/2022 at 2:15 AM, CKL said:I purchased an activation key before starting the process. I followed the set up as directed but when I got to the Application Activation I got the Read Failed-1. I then downloaded the Application 99 for my printer model followed the directions but then it won't give me the Serial & ID code when I try to activate online. My printer now does not recognize my cartridges and it shuts off every time I click the activate online button.
What do I do?
Please try this new file for you.
https://inkchip.net/download/INKCHIP.net_Firmware_99_XP430_v1.rar
1) Upload firmware which I sent
2) Switch on in normal mode(!!!!) just turn on button . - dont put printer in Program Update mode. (no need to press few buttons while turn on the printer)
The uploading process will stuck at 70-80% - it is ok!
Open task manager and stop updater process.
Printer will blink for about 5-15 minutes - then will power OFF.
Now power on the printer - chipless firmware is installed in your printer!
-
On 2/26/2022 at 1:37 AM, Berlincam86@aol.com said:Did the firmware part but will not activate online. This is a epson xp-4105.
Hi!
Please send me the screenshot of the error so I can help you!
Also, tell me your order number, thanks!
-
On 2/20/2022 at 8:39 PM, TKK said:WF 3620 series was sold in the U.S. at the office supply chain Staples.. Do you have a chipless solution or firmware downgrade for this model? It refuses to recognize most ink cartridges. Thanks for any info.
Hi!
Unfortunately, we don’t have any solution for this printer model.
Follow the updates on the website!
-
On 3/6/2022 at 3:45 AM, Ariel Retamal said:Hello,Is there any software for WF-3820? If not, do you have any plans for development?
Kind regards
Hi!
Unfortunately, we don’t have any solution for this printer model.
Follow the updates on the website!
-
On 2/27/2022 at 10:25 PM, nadia.rojas.93 said:HOLA DESCARGO TODO Y NO ME DEJA EXTRAER ME DISE QUE EL ARCHIVO ESTA DAÑADO QUE TENGO QUE HACER ?
¡Buenos días!
Para extraer un archivo necesitas usar cualquier archivador. Por ejemplo, WinRAR u otro... -
On 3/11/2022 at 12:17 PM, Rive said:Hello.
The same for me.
I paid yesterday (order 392336) but I haven't yet received my activation key.
Could you please advise ?
Thanks for your support.
Hi!
You sent an invalid email, that's why the email was not delivered.
You can send a working email here, after that our manager will send your key. -
On 3/2/2022 at 8:44 PM, kmingie said:same with me. I even bought a new code and still not working! Can anyone help?
Good afternoon!
You are inserting the key in the wrong place.You need to click the "activate online" button and insert the key in the pop-up window.
-
On 3/1/2022 at 4:29 AM, amanda.speed0@gmail.com said:I just got a brand new printer and want to convert it. Do I need to do a regular set up before I start the chipless process?
Hi!
You can start the process of installing chipless firmware without initiating the printer. -
-
Please try this new file :
https://inkchip.net/download/INKCHIP.net_Firmware_UP_XP15000_v1.rar
1) Upload firmware which I sent.
2) Switch on in normal mode(!!!) just turn on button . - dont put printer in Program Update mode.
(No need to press few buttons while turn on the printer)
The uploading process will stuck at 70-80% - it is ok! Open task manager and stop updater process. Printer will blink for about 5-15 minutes - then will power OFF.
Now power on the printer - chipless firmware is installed in your printer!
After that try to activate again.
-
Hello!
Please try this new file for you.
https://inkchip.net/download/INKCHIP.net_Firmware_99_WF2850_v1.rar
1) Upload firmware which I sent
2) Switch on in normal mode(!!!!) just turn on button . - dont put printer in Program Update mode. (no need to press few buttons while turn on the printer)
The uploading process will stuck at 70-80% - it is ok!
Open task manager and stop updater process.
Printer will blink for about 5-15 minutes - then will power OFF.
Now power on the printer - chipless firmware is installed in your printer!
-
Este número de error significa que la llave ya ha sido utilizada.
-
Hi!
Make sure that you have you installed Microsoft C++ packages as it was written in the instruction.
-
Here are some possible reasons why your printer prints blank forms after activating the firmware:
Activation code
in F.A.Q.
Posted
Hi!
I checked your order number. The key has not come to you because you have not provided the correct email address. Please contact our manager on WhatsApp, she will send you the key.
Manager's number:
+37281304009