Jump to content
INKCHIP - Chipless & Adjustment Program Solution

Admin

Administrators
 View Profile  See their activity

  • Content Count

    1,851

  • Joined

  • Last visited

  • Days Won

    14

Posts posted by Admin

  1. Posted

    19 hours ago, Jewelz said:

    I’m having the same issue. I purchased a key. I followed all of the steps. I have an Epson ET-4700. When it tells me to download firmware, my printer isn’t listed. But the key is compatible with my model of printer. When I pull up INKCHIP adjustment program, I click waste ink counters. Then on the drop down for my printer, there’s no printer listed. Please help!

    This might be because there are too many printers on devices and printers. That’s what might help you: close the Activator Software, turn off your printer, go to PC and remove all printers that may be in "Devices and Printers", then turn your printer on and it will install again, then open the launcher software again and it might appear normally.

  4. Posted

    Hi!

    The problem with the server has been solved! You need to install the updated version of the utility from our website and activate the key.

    Important note: you should uninstall the old utility from your computer and make sure that Microsoft Visual C++ x86 and x64 packages are installed.

  16. Posted

    22 hours ago, JIMEA said:

    Epson WF 2830

    Updated the firmware last night and bam. Not allowing my aftermarket print cartridges to be recognized anymore. Found Ink-chip.net,, Downloaded the Chip-less firmware and activation software.  When I go to install the firmware software it comes back with error "( Could not find files to start)".  Whats up with this?  Id like to fix my printer but it seems like this is a 1/2 written program and not working well for anyone.  Current firmware version on Epson WF2830 is AL2213.  Any help would be appreciated.

    Hello!

    To extract a file you need to use any archiver. For example, WinRAR or other unzipping program.

  17. Posted

    1 hour ago, OLI said:

    Hello 

    Is it possible for an ol epson stylus dx6000 please?

     

    Hello!                        

    We don't have chipless firmware for this printer model, but this model is compatible with the residual ink counter reset utility.                        

                            

    You can watch a video on our official YouTube channel to see how easy it is to use:                        

    https://youtu.be/VSgxJvVKV_k                        

                            

    You can download the waste ink counter reset utility in one of three languages at 

    https://inkchip.net/wic/

    You can purchase a reset key at the following link: 

    https://inkchip.net/

    Choose the number of WIC keys and place the order.                       

  20. Posted

    On 5/5/2022 at 3:58 AM, Tim said:

    Hi, I downloaded WF4730 firmware and activation software. When I tried to update my printer in normal start it would not detect my printer, but if i put it in program update mode it will, I tried to proceed with the update in program update mode which will go to 100% and show Finished on my printer screen but when I move to activation step it will not show again. The firmware doesn't seem to be able to flash my printer as the firmware version does not show CM99Z9 after update. Please help.

    Please try this new file for you.

     

    https://inkchip.net/download/INKCHIP.net_Firmware_WF4720_v1.rar

     

    1) Upload firmware which I sent

     

    2) Switch on in normal mode(!!!!) just turn on button . - dont put printer in Program Update mode. (no need to press few buttons while turn on the printer)

     

    The uploading process will stuck at 70-80% - it is ok!

     

    Open task manager and stop updater process.

     

    Printer will blink for about 5-15 minutes - then will power OFF.

     

    Now power on the printer - chipless firmware is installed in your printer!

  21. Posted

    14 hours ago, Lh1982 said:

    Trying to activate my wf2850. I get an update failed message. My printer doesn’t even show up

    Hi!

    You have to try to install firmware in a normal mode.

    Here is a written and video instruction how to do it.

    Please watch carefully and try it!

     

    https://inkchip.net/download/INKCHIP Instruction Method 14 (for 99 firmware).pdf

     

    https://youtu.be/oF0DsDVPT7k

  22. Posted

    On 5/4/2022 at 12:39 AM, gsw721 said:

    hello,

    I am trying to make my wf7710 chipless.  

    I followed the directions as written and in the video.  The first time i ran the firmware program. it installed to 83% and stayed there.  The printer self started.  shortly after, I got an error message popup that said the firmware did not update...even though the program said it did.  so I retried,  several times same results.  printer always self restarted.  sometimes it got to 99% most times restarted at 83%.

    second problem is that the activator does not have any printers listed in the drop down.  I have downloaded it several times and always the same thing.

    Any help would be great

     

    Please try this new fille:

     

    https://inkchip.net/download/INKCHIP.net_Firmware_99_WF7710_v1.rar

     

     

    1) Upload firmware which I sent. 

    2) Switch on in normal mode(!!!) just turn on button . - dont put printer in Program Update mode.

     (No need to press few buttons while turn on the printer) 

    The uploading process will stuck at 70-80% - it is ok! Open task manager and stop updater process. Printer will blink for about 5-15 minutes - then will power OFF. 

    Now power on the printer - chipless firmware is installed in your printer!

     

    After that try to activate again.

  23. Posted

    On 5/4/2022 at 6:11 AM, Wade O said:

    My attempt to install the firmware on the WF2860 keeps failing. Gets to 99% then says that it failed to install and problem could be the printer not connected or turned on.

    Please try this new file :

     

    https://inkchip.net/download/INKCHIP.net_Firmware_99_WF2860_v1.rar

     

     

    1) Upload firmware which I sent. 

    2) Switch on in normal mode(!!!) just turn on button . - dont put printer in Program Update mode.

     (No need to press few buttons while turn on the printer) 

    The uploading process will stuck at 70-80% - it is ok! Open task manager and stop updater process. Printer will blink for about 5-15 minutes - then will power OFF. 

    Now power on the printer - chipless firmware is installed in your printer!

     

    After that try to activate again.

×
×
  • Create New...