-
Content Count
1,851 -
Joined
-
Last visited
-
Days Won
14
Posts posted by Admin
-
-
18 hours ago, JhosepMX said:Al cargar el programa de activación, m impresora HP Laser 107w solo se queda con el botón de encendido activo y ya no hace nada mas.
Mire el video que muestra cómo usar el programa en nuestro canal oficial de YouTube: https://youtu.be/8kMg7KGRAGA
Si no detecta su versión de firmware, entonces no es compatible con nuestro firmware.
-
On 7/26/2022 at 2:57 PM, Stacey said:When I open the Activation app it’s garbled and doesn’t include the Printer option list values.
I’m unable to validate.
Hello!
Make sure you used a usb cable when installing the firmware and have a stable internet,are you?
Go to the menu devices and printers and check if the computer sees the connection to the printer.
Please send a screenshot, if possible.
-
On 7/26/2022 at 12:04 PM, Remi63800 said:Hello
i have buy one code for EPSON 2155
bur when I try to activated he say : printer not supported ?
can you help me ?
thanks( sorry iam French )
Hello!
This printer model is not listed as supported on our site.
So there isn’t solution for it.
-
On 7/25/2022 at 7:12 PM, hirzie said:Your original firmware cannot be downgraded to earlier versions, and our chipless firmware is an earlier version.
Basic concepts of the solution:
- Standard InkChip firmware.
Chipless firmware, which must be loaded into the printer using Firmware Mode.
- 99 InkChip firmware.
Chipless firmware, which must be loaded into Normal Mode.
- Firmware Mode - special mode for updating printer firmware, which is activated when a certain buttons combination is pressed.
- Normal Mode - normal mode of operation of the printer, simple switching on the printer with the power button.
Algorithm for solving the problem:
1. Check and memorize the firmware version of the printer. The firmware version displayed is the original non-update version.
2. Flash printer 99 with InkChip firmware in Firmware Mode.
3. When trying to activate the firmware with the Activation program and the activation code, the program will generate the Reading failed 1.
4. Start flashing the printer 99 again with InkChip firmware in Firmware Mode. When the firmware status in Firmware Mode reaches 100%, and the printer display finishes counting the percentage of the firmware status, you need to pull out the power cable of the printer. 5. Connect the power cable and turn on the printer. Recovery Mode will appear on the display.
6. Flash the printer with Inkchip firmware in Recovery Mode.
7. Check the firmware version of the printer. The firmware version displayed must be different from the non-renewable firmware version. This version is the chipless firmware version of InkChip.
8. Activate chipless firmware with the Activation program.
https://inkchip.net/download/INKCHIP.net_Firmware_99_WF5290_v1.rar
This is just an example of a process, it doesn't matter what model of printer you have. Please watch the video on our official YouTube channel:
https://www.youtube.com/watch?v=h7qWYWjMNFQ
And after that just ran again the inkchip firmware upload in normal mode.
-
11 hours ago, van said:My printer is the XP-2150. The firmware program always gets stuck at 99% even if I unplug the printer then turn it back on. I always run it on regular mode and the program on administrator mode with antivirus turned off. This makes no sense..
Hello!
Please try this new file :
https://inkchip.net/download/INKCHIP.net_Firmware_99_XP2100_v1.rar
1) Upload firmware which I sent.
2) Switch on in normal mode(!!!) just turn on button . - dont put printer in Program Update mode.
(No need to press few buttons while turn on the printer)
The uploading process will stuck at 70-80% - it is ok! Open task manager and stop updater process. Printer will blink for about 5-15 minutes - then will power OFF.
Now power on the printer - chipless firmware is installed in your printer!
After that try to activate again.
-
17 hours ago, JohnEnd1 said:Epson WF-2750
Tried using Reset, 1, Home, and power button. and nothing happens. I have tried at least 10 Times.
Help PLEASE !!!!
Hello!
Please try this new file :
https://inkchip.net/download/INKCHIP.net_Firmware_99_WF2750_v1.rar
1) Upload firmware which I sent.
2) Switch on in normal mode(!!!) just turn on button . - dont put printer in Program Update mode.
(No need to press few buttons while turn on the printer)
The uploading process will stuck at 70-80% - it is ok! Open task manager and stop updater process. Printer will blink for about 5-15 minutes - then will power OFF.
Now power on the printer - chipless firmware is installed in your printer!
After that try to activate again.
-
3 hours ago, van said:I am experiencing the same issue with an XP-2150 and no standard procedure will work or even SuziniNC's suggestion
Hello!
Please try this new file :
https://inkchip.net/download/INKCHIP.net_Firmware_XP2100_v1.rar
1) Upload firmware which I sent.
2) Switch on in normal mode(!!!) just turn on button . - dont put printer in Program Update mode.
(No need to press few buttons while turn on the printer)
The uploading process will stuck at 70-80% - it is ok! Open task manager and stop updater process. Printer will blink for about 5-15 minutes - then will power OFF.
Now power on the printer - chipless firmware is installed in your printer!
After that try to activate again.
-
12 hours ago, Dorky_Mom said:I know this question was asked over 18 months ago. But do you expect there to ever be development for the epson xp-5100?
Hi!
Unfortunately, not yet. As soon as we have the solution for new model available, it will appear on the website.
-
22 hours ago, Carla said:I'm trying to install the firmware for my WF-7720 and I'm getting an error that says my "printer is not connected or the connected printer is not the target printer" I am connected with a printer cable.
Hi!
Make sure you used a usb cable when installing the firmware and have a stable internet,are you?
Go to the menu devices and printers and check if the computer sees the connection to the printer.
-
23 hours ago, Novel said:My Printer Is Epson WF C 5290
Hi!
Please try this new file :
https://inkchip.net/download/INKCHIP.net_Firmware_99_WF5290_v1.rar
1) Upload firmware which I sent.
2) Switch on in normal mode(!!!) just turn on button . - dont put printer in Program Update mode.
(No need to press few buttons while turn on the printer)
The uploading process will stuck at 70-80% - it is ok! Open task manager and stop updater process. Printer will blink for about 5-15 minutes - then will power OFF.
Now power on the printer - chipless firmware is installed in your printer!
After that try to activate again.
-
18 hours ago, Carla said:Printer is now in recovery mode and I can't get it out. All the lights on the printer are flashing and it says ROM is not Writable. I have tried to resend the software multiple times with the same result.
Hello!
Please,try to return your printer to the original version of firmware and then activate the program again.
-
23 hours ago, Novel said:this same Proble whit me
please for the solutionI Install in Update Mode
https://inkchip.net/download/INKCHIP.net_Firmware_XP4100_v1.rar
1) Upload firmware which I sent.
2) Switch on in normal mode(!!!) just turn on button . - dont put printer in Program Update mode.
(No need to press few buttons while turn on the printer)
The uploading process will stuck at 70-80% - it is ok! Open task manager and stop updater process. Printer will blink for about 5-15 minutes - then will power OFF.
Now power on the printer - chipless firmware is installed in your printer!
-
On 7/18/2022 at 10:06 AM, Tiago said:Hi. Can you please explain how?
Hi!
You can install the original firmware back if you need it.
-
Hi!
Contact our support team please: support@inkchip.net
Send them the details of your purchase.
-
Hi!
This error means that the key has already been used. Please, contact our support team via this email, they will help you: support@inkchip.net
-
Hi!
You might have problem with internet connection, check your internet. The launcher is unable to update or communicate with the server. Disable anti-virus or use another internet.
-
3 hours ago, Julius0007 said:My WF2830 as well. The printer will restart at 71%.. The original firmware of my printer is AL05K3.
In the video guide it shows that you don't need it to load 100%. When the load gets stuck at 70-80%, that's okay! You will need to pull the cable out at that point and put it back in.
Then turn the printer on just using the power button.
Watch the video please:
-
-
13 hours ago, Inkoo said:Admin, same here, if you could help us with the EPSON WF-4820, we would really appreciate it.
Unfortunately, we do not have a solution for this model.
-
21 hours ago, SamanthaHope85 said:Same problem. I put in the code and the program stated NOT RESPONDING. I am now unable to reuse the code bc the program tells me it was used previously. ALSO I am unable to even use the Read WIC function for the same not responding/Printer communication error. All appropriate programs downloaded, connected with USB, Restarted computer and printer multiple times. after reading this thread, I went back and removed all the dashes and its telling me the code is invalid. Please help me.
Hi!
Did you install the Microsoft C ++ packages before running the utility?
If yes, please send me a screenshot from the download menu, so that I can see the date and time when the packages were installed.
Also, the error might be because you erased some key characters or left extra spaces in front and behind the key.
-
12 hours ago, Tiago said:I have a brand new HP Laser Color MFP 179fnw and i have some questions before installing the firmware.
I would like to know what happens if a printer update is installed after chipless firmware? I know the firmware will reset but what about the printer, will it stop working and throwing some error? I need to knwo what will happen.
Also, is it possible to install the original HP firmware in case i need to? For example if i want to send the printer to repair, i would want to install the original firmware for that. I wouldn't mind paying for chipless firmware again if necessary and install it again after.
Regards,
Tiago
Hi!
After installing chipless firmware you can always go back to the original firmware.- 1
-
Glad to hear that everything working fine!
-
Unfortunately we don't have a chipless firmware for the WF-110.
-
Hi!
Please tell me your order number and printer model so I can help you. Thank you!
Activation Code Key Not Working
in INKCHIP - Adjustment Program, Waste Ink Counter Reset (WIC), Red Light Error Solution
Posted
Hello!
Make sure that you have installed Microsoft C++ packages as it was written in the instruction(64x and 86x).