-
Content Count
1,851 -
Joined
-
Last visited
-
Days Won
14
Posts posted by Admin
-
-
On 10/4/2022 at 6:02 AM, taemickey84 said:I have this same issue and tried the link above. I still get the same error.
Hello,
This might be because your firmware hasn’t been installed properly. Tell me your printer model please.
-
-
On 10/4/2022 at 8:25 AM, Kith said:Hello,
I see that you failed to install the firmware.
You must install the firmware in normal mode.
To install the firmware in normal mode means to use only the power button.
Watch this video please:
Here’s the new firmware:
https://inkchip.net/download/INKCHIP.net_Firmware_99_XP235_v1.rar
-
On 10/5/2022 at 1:20 AM, izzy.lstbyzent@gmail.com said:I'am getting the same error message once it hits 100%. I have tried unplugging the power cord before the 100% and plugging it back in but i get the same error message
Hello,
Tell me your printer model please, I’ll send you the new instruction.
-
Hello!
Our software allows your printer to run without a chip and use any type of cartridge.
-
The code will be received by e-mail within 15 minutes after the order.
-
On 10/2/2022 at 3:56 AM, libeardoil said:downloaded inkchip.net_firmware , unzipped it, then tried to open the firmware file but i get an erroe " could not finf files needed to start "
how can i download the firmware
Hello!
Make sure that your antivirus program is disabled.
What is your model of printer?
-
6 hours ago, dolecool said:Por favor, pruebe este nuevo archivo para usted.
https://inkchip.net/download/INKCHIP.net_Firmware_99_XP245_v1.rar
1) Sube el firmware que he enviado
2) Encienda en el modo normal (!!!!) sólo encender el botón . - no pongas la impresora en modo de actualización del programa. (no es necesario presionar algunos botones mientras se enciende la impresora)
El proceso de carga se atascará en el 70-80% - ¡está bien!
Abra el administrador de tareas y detenga el proceso de actualización.
La impresora parpadeará durante unos 5-15 minutos y luego se apagará.
Ahora encienda la impresora - ¡el firmware sin chip está instalado en su impresora!
-
1
-
-
3 hours ago, Kith said:This might be because there are too many printers on devices and printers. That’s what might help you: close the Activator Software, turn off your printer, go to PC and remove all printers that may be in "Devices and Printers", then turn your printer on and it will install again, then open the launcher software again and it might appear normally.
-
13 hours ago, Danny Desantiago said:havent recived my code
Hello!
Please write your order number on email support@inkchip.net
-
2 hours ago, MattNShannon said:Is there software for Epson XP-7100?
Hello!
Unfortunately, we don’t have any solution for this printer model. -
Is your internet connection stable? Is your antivirus and firewall disabled? Also tell me please your Windows version.
Thank you!
-
¡Hola!
Por favor, pruebe este nuevo archivo para usted:
https://inkchip.net/download/INKCHIP.net_Firmware_XP240_v1.rar
1) Subir el firmware que he enviado
2) Encienda en modo normal (!!!) solo encienda el botón . - No ponga la impresora en modo de actualización del programa. (No es necesario presionar algunos botones mientras se enciende la impresora)
El proceso de carga se atascará al 70-80% - ¡está bien!
Abra el administrador de tareas y detenga el proceso de actualización.
La impresora parpadeará durante unos 5-15 minutos y luego se apagará.
Ahora encienda la impresora - ¡el firmware sin chip está instalado en su impresora!
-
22 hours ago, Jane said:Windows 11
Please try this new file for you.
https://inkchip.net/download/INKCHIP.net_Firmware_XP4100_v1.rar
1) Upload firmware which I sent
2) Switch on in normal mode(!!!!) just turn on button . - dont put printer in Program Update mode. (no need to press few buttons while turn on the printer)
The uploading process will stuck at 70-80% - it is ok!
Open task manager and stop updater process.
Printer will blink for about 5-15 minutes - then will power OFF.
Now power on the printer - chipless firmware is installed in your printer!
-
8 hours ago, francisrav4@hotmail.com said:Hello.
I just purchased an Epson EcoTank ET-2821, not listed in Supported Models for INKCHIP Tuning Program - Waste Ink Counter (WIC) Reset Utility for Epson Printer.
She is slated to appear in your list?.
Sorry for my English.
thank you for your reply
Hello,
Unfortunately, this model is not supported by the wic utility. And we don’t have the information concerning whether it is one day.
-
11 hours ago, Kristamarie said:I have the same problem with my XP-15000 with Epson firmware 20.42.NW99Z9
Hello,
You must install the firmware in normal mode.
To install the firmware in normal mode means to use only the power button.
Watch this video please:
Here’s the new firmware:
https://inkchip.net/download/INKCHIP.net_Firmware_99_XP15000_v1.rar
-
-
23 hours ago, Mkmills2 said:When I try to install the firmware it says files not found. In another window it asks for the code and serial and says the code not found. What do I need to do?
Hello,
You should turn the antivirus off before installing the firmware. Also use WinRAR in order to extract the file.
-
¡Hola!
Puede comprar una clave a través de nuestra página web en el menú ""comprar"". Elija la serie de impresoras, el modelo de impresora y el número de claves que necesita. Desde aquí puede hacer su pedido. Puede pagarlo con tarjeta bancaria o a través de PayPal, AliPay o Western Union.
Haga clic en el enlace: https://inkchip.net/price/
-
Hello!
We do not have chipless firmware for this printer model, but this model is supported by the waste ink counters reset utility.
You can watch a video on our official YouTube channel to see how easy it is to use:
You can download the WIC reset utility in one of five languages at https://inkchip.net/wic/
You can buy a reset key at the following link: https://inkchip.net/price/
Choose the number of WIC keys and then place an order.
-
For the code to be recognized you have to click on activate online and then insert the key in the popup window.
-
Es necesario instalar ambos paquetes de Microsoft Visual C++ x64 y x86.
¿Qué tipo de error está recibiendo?
-
Tell me please your Windows version.
-
3 hours ago, Lorinwoods said:WF 2860
Hello,
Send me the screenshot please. Have you installed the firmware successfully?
Error read failed Epson XP-241
in Error with activation program and technical issues with the printer
Posted
Hello,
You must install the firmware in normal mode.
To install the firmware in normal mode means to use only the power button.
Watch this video please:
https://youtu.be/oF0DsDVPT7k
Here’s the new firmware:
https://inkchip.net/download/INKCHIP.net_Firmware_99_XP240_v1.ra