-
Content Count
1,851 -
Joined
-
Last visited
-
Days Won
14
Posts posted by Admin
-
-
13 hours ago, cushypastel@gmail.com said:i have this exact same issue, tried to contact Kev but no replies on how too
Please contact us on email.
support@inkchip.net
-
Hello!
Do you using only USB connection to the printer? You should disable network connection.
-
Hello!
Did you stop the boot process at 75-85 percent through the task manager? You can't let the boot process get to 99 or 100 percent and fail.If you did everything correctly, then went to the activation program and inserted the key, and you failed to activate the chipless firmware, then I will send you instructions on how to flash the printer in recovery mode. -
You need to load the firmware without the chip and activate it with the recovery code, did you save it?You can repair chipless firmware with recovery code which was generated during flashing.
Watch the instruction video from our official Youtube channel on how to restore chipless firmware with recovery code: -
14 hours ago, jimwai said:May I ask when will the chip-free firmware for this machine be available?
Hello!
We can’t give you any guarantees. -
On 1/9/2023 at 5:02 AM, John Ovid said:EPSON XP235A, and yes, only thru USB mode we're doing the firmware. And yet, we still encounter this problem all the time.
On 1/9/2023 at 5:02 AM, John Ovid said:EPSON XP235A, and yes, only thru USB mode we're doing the firmware. And yet, we still encounter this problem all the time.
Try the same procedure on the another device.
And make sure your connection is stable. -
We thank you for the good review and are always happy to help if you need it!
-
Hello!
Our solutions can only be installed on a Windows operating system, the activation process does not take more than 10-15 minutes.
Afterwards your printer will be able to work with any operating system, just like before.
-
After activation our chipless firmware your printer will be able to work with all types of the cartridges, you can also use CISS, if it's is more convenient for you.
-
Hello!
Please contact us via email support@inkchip.net, we will resend your code.
Sorry for the inconvenience!
-
On 1/4/2023 at 2:22 PM, ibxplosive said:Hi, I accidently let my epson xp 15000 do its firmware update. Yep, wiped out chipless firmware. I know there is a recovery code for the firmware I paid for, I cannot find it! HELP
Hello!
Please write us your problem and order number on the email and our manager will help you.
support@inkchip.net
-
11 hours ago, Derylle said:Order 470790I purchased a Chipless Code/activation key for an Epson printer model WF 4730. After numerous attempts, I keep getting error codes.I have attached screenshots for your review. Please advise how to rectify this issue.https://drive.google.com/file/d/1maH8kurtYJ0W8xXDZ9qRo4rbL73YDcrC/view?usp=share_link
Thank you.Stay Blessed!Derylle K. SpearsHello!
Unfortunately cannot open the file as access is needed.
Please send screenshots on our email:
support@inkchip.net
-
-
On 12/24/2022 at 4:19 PM, AB1 said:I have the XP 15000. It is connected to my computer via USB; however, during the firmware instillation process it is not detecting the printer via USB. It only recognize it via network. I have made several attempts to rectify this issue but nothing seems to help.
This might be because there are too many printers on devices and printers. That’s what might help you: close the Activator Software, turn off your printer, go to PC and remove all printers that may be in "Devices and Printers", then turn your printer on and it will install again, then open the launcher software again and it might appear normally.
-
On 12/22/2022 at 3:25 PM, xixixihaha said:Any news on this?
Unfortunately we don’t have solution for this model yet.
-
4 hours ago, mozcakir said:hello i have epson tm-c3500 printer. can i use this program on tm-c3500?
Hello!
Unfortunately, we don’t have any solution for this printer model. -
9 hours ago, John Ovid said:Hello. I have tried the above method, but still, it says reading failed. The moment I use the activation software. Also, the normal mode does not work. It gets stuck as early as 14% and says that it does not detect the printer (unless in UPDATE MODE). Is there any workaround regarding this problem?
Hello!
What is your printer model?
Make sure you have turned off the printer's network connection to your computer and are only using a usb connection. -
14 hours ago, davidgonza said:buenas tardes, tengo exactamente el mismo problema.
segui los paso del video detalladamente.
como se puede solucionar?
Póngase en contacto con nosotros por correo electrónico para que podamos ayudarle:
support@inkchip.net -
On 12/15/2022 at 1:24 AM, fleurdelis@bellsouth.net said:I have confirmed the firmware is installed in the printer. I have two issues with activation
1. the activation exe does not open when I click open or run as administrator, nothing happens. I need to restart my computer and 1 out of 5 times it will open.
2. When I do get the activation window to open, the serial and ID code is not displaying so I cannot activate anything. I do get the drop down menu to select my printer .
Hello!
Please try this new activator:
-
On 12/5/2022 at 6:44 AM, mandysaezc7@gmail.com said:tiene la clave de reinicio del contador de tinta residual de la Epson L3150
¡Hola!
Puede descargar el programa en uno de cinco idiomas en https://inkchip.net/wic/
Puede comprar una clave de reinicio en el siguiente enlace: https://inkchip.net/price/
Elija la cantidad de claves WIC y luego haga un pedido.
-
On 12/5/2022 at 12:23 PM, 8twenty5vibe said:Thank you for your response . I read the instructions and the box still popped up in the same format. Also it says it cannot update file once I click out. Please help it’s been weeks I have several projects to complete. *pulls hair * lol
Please contact us via email as to this issue :
support@inkchip.net
-
Hello!
We cannot guarantee that you can successfully install and activate the firmware using Parallels desktop.
Install and activate the chipless firmware on a Windows computer (this usually takes no more than 15 minutes).
Your printer will then work with all computers and devices as before. Including Mac.
-
Hello!
You should install the Chipless Firmware in NORMAL mode instead of UPDATE mode.Please read the instruction from our website carefully:
https://inkchip.net/download/INKCHIP Instruction Method 14 (for 99 firmware).pdf
Also, please watch the video guide from our official YouTube channel:
Let me know the result!
Thank you! -
Hello!
You must enter all the characters we sent you in the order, but before you do that you need make sure that you did install Microsoft Visual C++ x64 and x86 2017-2022 packages in the letter with the WIC reset key. This is a prerequisite for the correct operation of the WIC reset utility. You should install them before running the utility and before using the WIC reset key, otherwise the key can be damaged. You can install this programs from here:https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads
WIC- No printers found
in INKCHIP - Adjustment Program, Waste Ink Counter Reset (WIC), Red Light Error Solution
Posted
It might be because there are too many printers on devices and printers.
That’s what might help you: close the Activator Software, turn off your printer, go to PC and remove all printers that may be in ""Devices and Printers"", then turn your printer on and it will install again, then open the launcher software again and it might will appear normally.