EPSON XP-520

[EPSON XP-520]

16 hours ago, TMichelleT said:

Do you have the software for this printer?

Hello,

Unfortunately no. You can see the full list of supported models here:

https://inkchip.net/soft/

Your model is supported by the Waste Ink Counters reset utility.

You can watch the video on our official YouTube channel to see how easy it is to use:

You can download the WIC reset utility in one of five languages at https://inkchip.net/wic/ 

You can buy a reset key at the following link: https://inkchip.net/price/ 

Choose the number of WIC keys and place an order. 

[WF-2850 updated firmware on printer, but system won't recognize so I can't activate.]

18 hours ago, Loudog75 said:

ok, so firmware should be installed but, now the activation doesnt list my device so i can activate it

 

Hello,

This might be because there are too many printers on devices and printers. That’s what might help you: close the Activator Software, turn off your printer, go to PC and remove all printers that may be in "Devices and Printers", then turn your printer on and it will install again, then open the launcher software again and it might appear normally.

[Not Responding / Key already in use]

Hello!

Please send me the screenshot from the download menu so that I can check if the correct Microsoft Visual C++ were installed.

[Wf2850 activation]

Please try to use this new activation program for you:

 

https://inkchip.net/download/activation.rar

[Wf2850 activation]

1 hour ago, dekez50 said:

Firmware loaded correctly into wf2850, downloaded the activation program and when I click to activate online button the program freezes up and will not clear up.  Any suggestions?

Hello,

Send me the screenshot of the error please. Your firmware might have not installed correctly.

[WF-2850 updated firmware on printer, but system won't recognize so I can't activate.]

On 10/16/2022 at 5:06 PM, Loudog75 said:

 

In the video guide it shows that you don't need it to load 100%. When the load gets stuck at 75-85%, that's okay! You will need to pull the cable out at that point and put it back in.

Then turn the printer on just using the power button.

Watch the video please:

 

https://youtu.be/oF0DsDVPT7k

[Activation Software isn't working]

This might be because there are too many printers on devices and printers. That’s what might help you: close the Activator Software, turn off your printer, go to PC and remove all printers that may be in "Devices and Printers", then turn your printer on and it will install again, then open the launcher software again and it might appear normally.

[Drop down is blank]

16 hours ago, NishaT said:

I see I needed to keep the USB cord attached. 

This might be because there are too many printers on devices and printers. That’s what might help you: close the Activator Software, turn off your printer, go to PC and remove all printers that may be in "Devices and Printers", then turn your printer on and it will install again, then open the launcher software again and it might appear normally.

[Es permanente el chip virtual]

Olá!

Uma vez que o firmware sem chipless tenha sido instalado, a acção é interminável. Não precisa de comprar as chaves novamente, a única coisa que precisa de fazer é não actualizar a versão do firmware da impressora após a instalação.

[Activation issues with Epson XP-4100]

Tell me please, in which mode did you install the firmware?

[Read Failed -1 (Epson XP4105]

Are you using USB connection to the printer? Is there only one printer connected to your computer?

[Read Failed -1 (Epson XP4105]

Hello,

You must install the firmware in normal mode.

To install the firmware in normal mode means to use only the power button. 

Watch this video please:

https://youtu.be/oF0DsDVPT7k

Here’s the new firmware:

https://inkchip.net/download/INKCHIP.net_Firmware_XP4100_v1.rar

[una key]

On 10/12/2022 at 2:44 AM, ten.ch.u@hotmail.es said:

Hola acabo de hacer la compra pero no recibo la clave. El correo si llego con su factura pero está vacío sin clave.

mi número de pedido es "Ordene 449349 "

 

Envíenos un correo electrónico, por favor: support@inkchip.net

 

[XP 15000 activation issue]

Are you using USB connection to the printer? Is there only one printer connected to your computer?

[XP 2101 NO CARGA EL FIRMAWARE]

16 hours ago, julio7717 said:

en la epson xp2101 no me deja cargar el firmware Pedido #448680] (8 de octubre de 2022)

Para extraer un archivo necesitas usar cualquier archivador. Le recomendamos que utilice WinRar para asegurarse de que todo funciona sin problemas

[XP 2101 NO CARGA EL FIRMAWARE]

16 hours ago, julio7717 said:

en la epson xp2101 no me deja cargar el firmware Pedido #448680] (8 de octubre de 2022)

Para extraer un archivo necesitas usar cualquier archivador. Le recomendamos que utilice WinRar para asegurarse de que todo funciona sin problemas

[Imprimante "pas cible"]

21 hours ago, augusseau.stephanie@orange said:

Hello,

Thank you for your answer.

I tried what you proposed but it didn't work. Here a copy of my screen.

Thank you for help

Make sure there is nothing wrong with your USB cable and that your computer recognizes the USB connection to the printer.

[XP 15000 activation issue]

Hello,

Send me the screenshot please. You should press “activate online”  and insert the key without spaces before and after in the pop-up window. 

[Wf7710 does printer have to be in normal state before changing firmware?]

18 hours ago, Twd01 said:

Does my wf7710 have to be in normal state before changing firmware?  Can I change firmware while it says (dont recognize cartridge)? 

Hello,

Yes, you have to install the firmware now.

Watch this video please:

https://youtu.be/oF0DsDVPT7k

Here’s the Chipless firmware:

https://inkchip.net/download/INKCHIP.net_Firmware_99_WF7710_v1.rar

 

Have you bought the key?

[Imprimante "pas cible"]

7 hours ago, augusseau.stephanie@orange said:

bonjour,

Le logiciel n'affiche pas mon imprimante pourtant connecté. j'ai un message me disant "imprimante connectée mais non cible".

C'est une epson XP 5100. Je ne peux donc pas rentrer la clée d'activation.

Pouvez vous m'aider?

Merci

Hello!

It might be because there are too many printers on devices and printers. 

 

That’s what might help you: close the Activator Software, turn off your printer, go to PC and remove all printers that may be in ""Devices and Printers"", then turn your printer on and it will install again, then open the launcher software again and it might will appear normally.

[XP 2101 NO CARGA EL FIRMAWARE]

4 hours ago, julio7717 said:

COMPRE LA LLAVE PERO NO ME CARGA EL FIRMWARE NI EL PROGRA DE ACTIVACION DETECTA LA IMPRESORA [Pedido #448680] (8 de octubre de 2022)

¡Hola!
Escríbanos a support@inkchip.net sobre esta pregunta.

[EPSON XP-247 ERROR READ FAILED -1]

Nos alegra mucho oírlo.

[Communication Failed - Error 10093]

Hello!

We are already solving your problem and have contacted you by mail. The error occurs because you purchased a key that does not match your printer model.

[Firmware errors at 99%]

In the video guide it shows that you don't need it to load 100%. When the load gets stuck at 75-85%, that's okay! You will need to pull the cable out at that point and put it back in.

Then turn the printer on just using the power button.

Watch the video please:

 

https://youtu.be/oF0DsDVPT7k

[WIC- No printers found]

On 10/4/2022 at 5:42 PM, jhowe393@gmail.com said:

Does WIC firmware support Epson WF 7210?  It is not listed as supported and the WIC firmware doesn't show any printers when I install it.

Hello,

There’s no wic firmware, wic solution includes the wic utility and the wic key. 
Unfortunately, your model is not supported.