Jump to content
INKCHIP - Chipless & Adjustment Program Solution

Admin

Administrators
 View Profile  See their activity

  • Content Count

    1,860

  • Joined

  • Last visited

  • Days Won

    15

Posts posted by Admin

  6. Posted

    On 12/16/2021 at 5:43 PM, Arlie said:

    Hello! Im attempting to convert my XP 15000 to chipless but the firmware gets to 99% and stops. Ive tried unnplugging it and plugging it back in several times and each time it on;y gets to 99%. Any suggestions?

    To install the firmware in normal mode means to use only the power button. Not the power button and the display corner. You don't have to put the printer into update mode.
    In the videos we sent you that you don't need it to load 100%. When the load gets stuck at 75-85%, that's okay! You will need to pull the cable out at that point and put it back in.
    Then turn the printer on just using the power button.
    Watch the video again:

    https://youtu.be/oF0DsDVPT7k

    Let me know the result!
    Thank you!

  7. Posted

    On 12/16/2021 at 2:19 PM, dimon26072001 said:

    Please help me on my XP-434, we have the same problem

    Please try this new file for you.
     
    https://inkchip.net/download/INKCHIP.net_Firmware_99_XP430_v1.rar
     
    1) Upload firmware which I sent
     
    2) Switch on in normal mode(!!!!) just turn on button . - dont put printer in Program Update mode. (no need to press few buttons while turn on the printer)
     
    The uploading process will stuck at 70-80% - it is ok!
     
    Open task manager and stop updater process.
     
    Printer will blink for about 5-15 minutes - then will power OFF.
     
    Now power on the printer - chipless firmware is installed in your printer!

  8. Posted

    12 hours ago, TerryC said:

    1857136041_2021-12-17(1).thumb.png.94379dee4534b59cad28fb775757e861.pngI have the same issue.

     

    To install the firmware in normal mode means to use only the power button. Not the power button and the display corner. You don't have to put the printer into update mode.
    In the videos we sent you that you don't need it to load 100%. When the load gets stuck at 75-85%, that's okay! You will need to pull the cable out at that point and put it back in.
    Then turn the printer on just using the power button.
    Watch the video again:

    https://youtu.be/oF0DsDVPT7k

    Let me know the result!
    Thank you!

  10. Posted

    18 hours ago, Robin Harvey-Young said:

    I have removed all spaces. I’ve even emailed key to myself to ensure no extra spaces. I have also checked for extra spaces in the front & back of the “input reset waste ink key” box where I pasted the key. This is not an issue with extra spaces. 

    Hi!
    Have you installed the Microsoft C ++ packages before you run the utility? If so, please send me the screenshot from the download menu so I can see the exact date and time of installation.

    Make sure you put the key in correctly, remove any extra spaces from the front and back of the key, make sure you don't accidentally erase the signs.

  12. Posted

    On 12/16/2021 at 4:15 AM, RacktheJipper said:

    The Firmware application for the first step keeps giving me a "could not find files needed to run" when I try to open the .exe What do I do?

    Good day!

    To extract a file you need to use any archiver. For example, WinRAR or other...

  13. Posted

    3 hours ago, Juan Carlos said:

    hola también tengo problemas con una wf-2630 me genera el mismo error.

     

     

    Captura de pantalla 2021-12-15 094458.png

    ¡Hola!
    Debe convencerse de que instala el firmware sin chip en el modo NORMAL en lugar del modo ACTUALIZAR.

    Lea atentamente las instrucciones de nuestro sitio web:

    https://inkchip.net/download/INKCHIP Instruction Method 14 (for 99 firmware).pdf

    Además, mire la guía de video de nuestro canal oficial de YouTube:

    https://youtu.be/oF0DsDVPT7k


    Si tiene algún problema, ¡escríbanos!
    ¡Gracias!

  14. Posted

    On 12/8/2021 at 1:54 PM, yammy said:

    Hi. I also have the same problem. Have you resolved this?

    Your original firmware cannot be downgraded to earlier versions, and our chipless firmware is an earlier version.  

    Basic concepts of the solution: 
    - Standard InkChip firmware. Chipless firmware, which must be loaded into the printer using Firmware Mode. 
    - 99 InkChip firmware. Chipless firmware, which must be loaded into Normal Mode. 
    - Firmware Mode - special mode for updating printer firmware, which is activated when a certain buttons combination is pressed. 
    - Normal Mode - normal mode of operation of the printer, simple switching on the printer with the power button.  

    Algorithm for solving the problem: 
    1. Check and memorize the firmware version of the printer. The firmware version displayed is the original non-update version. 
    2. Flash printer 99 with InkChip firmware in Firmware Mode. 
    3. When trying to activate the firmware with the Activation program and the activation code, the program will generate the Reading failed 1. 
    4. Start flashing the printer 99 again with InkChip firmware in Firmware Mode. When the firmware status in Firmware Mode reaches 100%, and the printer display finishes counting the percentage of the firmware status, you need to pull out the power cable of the printer. 
    5. Connect the power cable and turn on the printer. Recovery Mode will appear on the display. 
    6. Flash the printer with Inkchip firmware in Recovery Mode. 
    7. Check the firmware version of the printer. The firmware version displayed must be different from the non-renewable firmware version. This version is the chipless firmware version of InkChip. 
    8. Activate chipless firmware with the Activation program.

    https://inkchip.net/download/INKCHIP.net_Firmware_99_WF5290_v1.rar

    This is just an example of a process, it doesn't matter what model of printer you have. 

    Please watch the video on our official YouTube channel: https://www.youtube.com/watch?v=h7qWYWjMNFQ  

    And after that just ran again the inkchip firmware upload in normal mode.

  17. Posted

    On 12/6/2021 at 3:35 PM, 5155 said:

    I suppose it is not a popular model, but I was wondering is anyone working on chipless firmware for EC-C7000? Even with a firmware rollback, its been a pain in the butt.  Haven't printed anything but test pages and it's not recognizing my cyan or magenta.  This is a replacement by the way.  PLEASE, please consider.

    Good afternoon!

    Unfortunately, we do not have a solution for this model.

  19. Posted

    If you have the latest Windows OS, you should try installing the firmware from another computer with an earlier OS. Installation will take about 15 minutes, after which you can use the printer as before, with any computer.

    On 12/3/2021 at 11:45 PM, MimiMousey said:

    I was having the same issues and then I did end the task at 87% and went to settings and looked at the firmware listed and it had the updated firmware from inkchip. My problem is now when I go to the activation program I try to choose device and the menu is blank. I try to activate online and it says I have to choose a device first. .

    1460113774_image(1).thumb.png.4af435856bef82f90829668eee212594.png

    Hi! If you have the latest Windows OS, you should try installing the firmware from another computer with an earlier OS. Installation will take about 15 minutes, after which you can use the printer as before, with any computer.

  23. Posted

    On 12/3/2021 at 9:11 PM, juliet2374 said:

    hi there. I just purchased the firmware code for my printer but when I look in the instructions to make my Epson 4105 into a chipless printer it says I need an activation program. I can't find anything on this site for that. Is it part of the firmware code program or am I missing something? 

    Good afternoon!

    Download chipless firmware and activation program for your printer model on our website.

    Follow the link: https://inkchip.net/soft/

×
×
  • Create New...