Admin

Hello! Please share the screenshot of the error. Thanks!

Hello! Please try this updated file with the Chipless Firmware: https://inkchip.net/download/INKCHIP.net_Firmware_99_XP3100_v1.rar 1) Upload the Chipless Firmware which is attached above. 2) Turn on the printer in the NORMAL MODE (using only the power button). Do not put the printer in the UPDATE MODE. The loading process will get stuck at 75-85% - that is OK. 3) With the use of the task manager stop the loading process. Printer will blink for about 5-15 minutes . It should then turn off automatically. 4) Now turn on the printer - Chipless Firmware should be installed! 5) Run the Activation Software to insert your Activation Key.

Unfortunately, no guarantees regarding the date of release. Keep following the webpage for updates.

Hello! Unfortunately, not yet but keep following the updates on the webpage.

Hello! It seems that EPSON made an update, so you need to wait when it will be newer version of firmware and upgrade it.

Hello! Our solution works with all types of cartridges.

We have already replied to you about this issue.

We have already replied to you.

Hello! Our server is fine. What mode did you install the firmware in? Normal mode or update mode?

Hello! The original firmware of your printer cannot be downgraded to earlier version. Please, follow the instructions below. The firmware, which you need to use: https://inkchip.net/download/INKCHIP.net_Firmware_2022June_WF5790_v1.rar Algorithm for solving the problem: 1) Check and memorize current firmware version of your printer. 2) Start installing the firmware in the Firmware Mode (by pressing a certain button combinations) 3) When the firmware installation reaches 100% you need to disconnect the power cable from your printer. Wait for about 10 seconds and then plug the cable in. A message will appear on your printer screen, saying that the printer is in Recovery Mode. 4) Start installing the Inkchip firmware again, wait for the firmware to load, your printer will shut down. Turn your printer on. 5) Check your printer's firmware version. It must be different. This means that the process was successful. 6) Now you need to use the Activation Program from our website and activate it with the key. After the activation you have to reboot your printer. The chipless firmware is installed on your printer! Please watch the instruction video from our YouTube channel for a clear explanation: This is just an example of the process, it does not matter which model of printer you have.

Hello! The original firmware of your printer cannot be downgraded to earlier version. Please, follow the instructions below. The firmware, which you need to use: https://inkchip.net/download/INKCHIP.net_Firmware_2022June_WF5790_v1.rar Algorithm for solving the problem: 1) Check and memorize current firmware version of your printer. 2) Start installing the firmware in the Firmware Mode (by pressing a certain button combinations) 3) When the firmware installation reaches 100% you need to disconnect the power cable from your printer. Wait for about 10 seconds and then plug the cable in. A message will appear on your printer screen, saying that the printer is in Recovery Mode. 4) Start installing the Inkchip firmware again, wait for the firmware to load, your printer will shut down. Turn your printer on. 5) Check your printer's firmware version. It must be different. This means that the process was successful. 6) Now you need to use the Activation Program from our website and activate it with the key. After the activation you have to reboot your printer. The chipless firmware is installed on your printer! Please watch the instruction video from our YouTube channel for a clear explanation: https://www.youtube.com/watch?v=h7qWYWjMNFQ This is just an example of the process, it does not matter which model of printer you have.

Hello! Tell me please your order number.

Hello! You should convince that installed the Chipless Firmware in NORMAL mode instead of UPDATE mode. Please read the instruction from our website carefully: https://inkchip.net/download/INKCHIP Instruction Method 14 (for 99 firmware).pdf Also, please watch the video guide from our official YouTube channel: https://youtu.be/oF0DsDVPT7k Let me know the result! Thank you!

Stop the boot process through your task manager. Don't let the boot process reach 99% and error.

Hello! Please share us with the screenshot or provide more information. Thanks!

Hello! In the video guide it shows that you don't need it to load 100%. When the load gets stuck at 75-85%, that's okay! You will need to pull the cable out at that point and put it back in. Then turn the printer on just using the power button. Watch the video please:

¡Hola! Debería instalar el Firmware Chipless en modo NORMAL en lugar de en modo ACTUALIZAR. Por favor, lea atentamente las instrucciones de nuestro sitio web: https://inkchip.net/download/INKCHIP Instruction Method 14 (for 99 firmware).pdf También puedes ver la guía en vídeo de nuestro canal oficial de YouTube: https://youtu.be/oF0DsDVPT7k ¡Háganme saber el resultado! Gracias.

¡Hola! Hemos publicado una nueva versión de la utilidad de restablecimiento del WIC en el sitio web. Por favor, borre la versión antigua de su ordenador y descargue la nueva desde el sitio web: https://inkchip.net/wic/

Hello! Unfortunately, we cannot give you any guarantees. Follow the updates on our website. Thanks!

Hello! Unfortunately, we cannot give you any guarantees. Follow the updates on our website. Thanks!

Sorry for the inconvenience, please contact us by email support@inkchip.net, we will send your order.

Let me know!

Hello! The latest Chipless firmware version is posted on website. Thanks!

Hello! Fortunately, our firmware is tested and absolutely safe for your computer and printer. Turn off your antivirus while the firmware is being installed.

Hello! Please try this updated file with the Chipless Firmware: https://inkchip.net/download/INKCHIP.net_Firmware_XP4100_v1.rar 1) Upload the Chipless Firmware which is attached above. 2) Turn on the printer in the NORMAL MODE (using only the power button). Do not put the printer in the UPDATE MODE. The loading process will get stuck at 75-85% - that is OK. 3) With the use of the task manager stop the loading process. Printer will blink for about 5-15 minutes . It should then turn off automatically. 4) Now turn on the printer - Chipless Firmware should be installed! 5) Run the Activation Software to insert your Activation Key. Let me know the result! Thanks!