Jump to content
INKCHIP - Chipless & Adjustment Program Solution

Admin

Administrators
 View Profile  See their activity

  • Content Count

    1,851

  • Joined

  • Last visited

  • Days Won

    14

Posts posted by Admin

  2. Posted

    On 5/26/2023 at 10:50 PM, ensozh said:

    Dear friends

    I have a problem, My Epson WF-c5710 feeds several pages using backtray feeder with no error message to try to solve the problem.
    I asked an Epson Technician and he told me the solution may be upgrading firmware.

    Does anybody had  has this issue?

    Any solution or suggestion?

     

    Thanks

     

     

    Hello!

    It seems that EPSON made an update, so you need to wait when it will be newer version of firmware and upgrade it.

  7. Posted

    17 hours ago, cjburgoz said:

    error.thumb.jpeg.28a603c8279ac4153f399dbe7271538c.jpeg

    Hello!

    The original firmware of your printer cannot be downgraded to earlier version. Please, follow the instructions below.

    The firmware, which you need to use:

    https://inkchip.net/download/INKCHIP.net_Firmware_2022June_WF5790_v1.rar

    Algorithm for solving the problem:

    1) Check and memorize current firmware version of your printer.

    2) Start installing the firmware in the Firmware Mode (by pressing a certain button combinations)

    3) When the firmware installation reaches 100%  you need to disconnect the power cable from your printer.

    Wait for about 10 seconds and then plug the cable in. A message will appear on your printer screen, saying that the printer is in Recovery Mode.

    4) Start installing the Inkchip firmware again, wait for the firmware to load, your printer will shut down. Turn your printer on.

    5) Check your printer's firmware version. It must be different. This means that the process was successful.

    6) Now you need to use the Activation Program from our website and activate it with the key.

    After the activation you have to reboot your printer.

    The chipless firmware is installed on your printer!

    Please watch the instruction video from our YouTube channel for a clear explanation:

     

    This is just an example of the process, it does not matter which model of printer you have.

  8. Posted

    17 hours ago, cjburgoz said:

    Me pasa lo mismo, cual es la solución?
    The same thing happens to me, what is the solution?

    Hello!

    The original firmware of your printer cannot be downgraded to earlier version. Please, follow the instructions below.

    The firmware, which you need to use:

    https://inkchip.net/download/INKCHIP.net_Firmware_2022June_WF5790_v1.rar

    Algorithm for solving the problem:

    1) Check and memorize current firmware version of your printer.

    2) Start installing the firmware in the Firmware Mode (by pressing a certain button combinations)

    3) When the firmware installation reaches 100%  you need to disconnect the power cable from your printer.

    Wait for about 10 seconds and then plug the cable in. A message will appear on your printer screen, saying that the printer is in Recovery Mode.

    4) Start installing the Inkchip firmware again, wait for the firmware to load, your printer will shut down. Turn your printer on.

    5) Check your printer's firmware version. It must be different. This means that the process was successful.

    6) Now you need to use the Activation Program from our website and activate it with the key.

    After the activation you have to reboot your printer.

    The chipless firmware is installed on your printer!

    Please watch the instruction video from our YouTube channel for a clear explanation:

    https://www.youtube.com/watch?v=h7qWYWjMNFQ

    This is just an example of the process, it does not matter which model of printer you have.

  9. Posted

    On 5/24/2023 at 9:55 AM, Jorge.rog said:

    Hi, 
    I've been trying to reach inkchip's support for a more than a week now, but since I have no response I wonder if someone can help me.
    I had to recover the original firmware of the printer due warranty reasons. Now, I have installed the inkchip firmware again and I'm trying to use the recovery code to make it work.
    But the inckchip activation software simply doesn't work. Does anyone has a previous version of the software to see if it works? Cause from the instruction videos I have found about recovering looks a bit different.

    Best regards.

    idcode.jpg

    Hello!

    Tell me please your order number.

  10. Posted

    On 5/23/2023 at 4:32 AM, cjcoolmama said:

    Hello, I have completed the firmware update and it show under the settings on the printer firmware update current version is BL05K3. During the activation please wait for the update to be finished then another pop up comes up that says "Software Atualizado, Software Atualizado pro favor, execute Novament OK then it shuts off and closes. I need help with completing the activation key. Thanks 

    Hello!

    You should convince that installed the Chipless Firmware in NORMAL mode instead of UPDATE mode.

     

    Please read the instruction from our website carefully:

     

    https://inkchip.net/download/INKCHIP Instruction Method 14 (for 99 firmware).pdf

     

    Also, please watch the video guide from our official YouTube channel:

     

    https://youtu.be/oF0DsDVPT7k

     

    Let me know the result!

    Thank you!

  11. Posted

    On 5/22/2023 at 4:26 PM, obrijohn said:

    so I did watch the video and unplugged the printer when the load gets stuck around 80%. when I plug the printer back in it turns back on automatically (I didn't need to press the power on button) and the firmware loading process continues on my computer screen. this is where it then jumps from 80 to 99%, but then stops and gives me that error message. This is what I don't understand, am I supposed to continue on with the activation process or is there in fact an error with the firmware install process I need to fix?

    Stop the boot process through your task manager. Don't let the boot process reach 99% and error.

  13. Posted

    On 5/19/2023 at 6:33 PM, obrijohn said:

    I have the WF-2850 and followed the install video step by step and still can not seem to get the firmware to install. Reading other forum questions it seems a lot of people forget about unplugging the printer and waiting the 10 seconds. I've done that and am still having issues. I currently have Epson cartridge's installed, black ink is full but I am running very low on color ink causing the green power light to blink at all times (indicating need to replace cartridge) when the unit is powered on. Is there a chance this is causing the firmware to not install?

    spacer.png

    Hello!

    In the video guide it shows that you don't need it to load 100%. When the load gets stuck at 75-85%, that's okay! You will need to pull the cable out at that point and put it back in.

    Then turn the printer on just using the power button.

    Watch the video please:

     

     

  14. Posted

    On 5/20/2023 at 3:47 AM, yojan said:

    buenas noches

    tengo la impresora epson wf 2860 ya hize el proceso de actualizacion y al momento de usa la herramienta de activacion nome responde se queda pensado y no avanza 

     

     

    16845473543844404399573885846255.jpg

    ¡Hola!
    Debería instalar el Firmware Chipless en modo NORMAL en lugar de en modo ACTUALIZAR.

    Por favor, lea atentamente las instrucciones de nuestro sitio web:

    https://inkchip.net/download/INKCHIP Instruction Method 14 (for 99 firmware).pdf

    También puedes ver la guía en vídeo de nuestro canal oficial de YouTube:

    https://youtu.be/oF0DsDVPT7k

    ¡Háganme saber el resultado!
    Gracias.

  15. Posted

    On 5/20/2023 at 9:32 AM, Horacio said:

    hola cuando pongo el codigo de ingreso ,me dice LA CLAVE INTRODUCIDA NO ES VALIDA ,INTENTE NUEVAMENTE ???? Que debo hacer?

    ¡Hola!
    Hemos publicado una nueva versión de la utilidad de restablecimiento del WIC en el sitio web. Por favor, borre la versión antigua de su ordenador y descargue la nueva desde el sitio web: https://inkchip.net/wic/

  16. Posted

    5 hours ago, Arkum said:

    IS there any chipless firmware coming? if yes is there an estimated period?

    Plus i have the extra tray that connects underneath the printer, Does it matter when chipless firmware is installed on the machine? I mean does the firmware effect the tray or disable it by any chance? I would be glad if i get a precise answer! 

    Best Regards to the whole team.

    Hello!

    Unfortunately, we cannot give you any guarantees. Follow the updates on our website.

    Thanks!

  20. Posted

    On 5/16/2023 at 7:20 AM, 搬运工 said:

    The firmware version of EPSON WF-C8690a is wrong. Is there a higher version? Write the chip firmware of version 1.43, prompting various errors. Hopefully a later version of compatible firmware will be available. Looking forward, thank you

    Hello! 
    The latest Chipless firmware version is posted on website.

     Thanks!

  21. Posted

    14 hours ago, Tyasia said:

    I have also been trying to download the activation software for the Epson XP- 15000.  It is giving me a fail- insufficient permission error.  The firmware downloaded fine.  I have an activation code, but have not gotten to a point were I can use it. Please help.

    Screenshot 2023-05-14 212453.png

    Hello!
    Fortunately, our firmware is tested and absolutely safe for your computer and printer. Turn off your antivirus while the firmware is being installed.

  22. Posted

    10 hours ago, alatae said:

    Hi! I made the purchase through inkchip.net for my Epson 4105 and went through all of the steps. And it showed finished on my printer screen but when I download the activation, it doesn't show anything or allow me to go further. It's like something is missing when I extracted the zip file for it... The firmware did transfer to my printer successfully but I can't even put in my access key info.. what can be done? 

    Hello!
    Please try this updated file with the Chipless Firmware:
    https://inkchip.net/download/INKCHIP.net_Firmware_XP4100_v1.rar

    1) Upload the Chipless Firmware which is attached above.

    2) Turn on the printer in the NORMAL MODE (using only the power button). Do not put the printer in the UPDATE MODE.

    The loading process will get stuck at 75-85% - that is OK.

    3) With the use of the task manager stop the loading process.

    Printer will blink for about 5-15 minutes . It should then turn off automatically.

    4) Now turn on the printer - Chipless Firmware should be installed!

    5) Run the Activation Software to insert your Activation Key.

    Let me know the result!
    Thanks!

     

    • Like 1

  24. Posted

    18 hours ago, morrisohbig said:

    Am experiencing same problem with wf-2850. What is wrong 

    Hello!
    You should install the Chipless Firmware in NORMAL mode instead of UPDATE mode.

    Please read the instruction from our website carefully:

    https://inkchip.net/download/INKCHIP Instruction Method 14 (for 99 firmware).pdf

    Also, please watch the video guide from our official YouTube channel:

    https://youtu.be/oF0DsDVPT7k

     

  25. Posted

    On 5/10/2023 at 11:17 PM, jgutierr_post@yahoo.com said:

    Hi Admin - that activation.rar did not work either.

    You should convince that installed the Chipless Firmware in NORMAL mode instead of UPDATE mode.

     

    Please read the instruction from our website carefully:

     

    https://inkchip.net/download/INKCHIP Instruction Method 14 (for 99 firmware).pdf

     

    Also, please watch the video guide from our official YouTube channel:

     

    https://youtu.be/oF0DsDVPT7k

     

    Let me know the result!

    Thank you!

×
×
  • Create New...