Admin

You don't have to put in your serial number.You have to put in your activation key in pop up window after clicking on Activate online button.

You should install the chipless firmware in NORMAL mode instead of UPDATE mode. Please read the instruction from our website carefully: https://inkchip.net/download/INKCHIP Instruction Method 14 (for 99 firmware).pdf Also, please watch the video guide from our official YouTube channel: https://youtu.be/oF0DsDVPT7k

Yes,please,try on device with Windows10 software version.Firmware can not work on 11 Windows version,because it isn't apdated for a new update of Windows yet.

Hello! Unfortunately, we do not have a solution for this model.

Hi! Please tell me your order number and send me the screenshot of the error so we can help you!

Hi! You installed chipless firmware on your printers and activated the key, right? The thing is, chipless firmware is a solution for cartridges and it has no relation to the maintenance box. If you need to reset the ink counters, there's another solution for that, the WIC reset utility. Please check if your model is supported by our utility at: https://inkchip.net/wic/

¡Hola! WIC no hará que su impresora no tenga chip. Waste Ink Counter permite a los usuarios restablecer el contador de tinta residual en un número de impresoras Epson. Cuando los usuarios reciben el temido mensaje de "Error de servicio" que dice, "Las piezas de su impresora están al final de su vida útil. Póngase en contacto con Epson", la impresora se apagará. El WIC permitirá al cliente restablecer el contador de tinta residual de los usuarios, rectificando el "Error de servicio", y devolviendo la vida a la impresora. https://youtu.be/1urPOd_KXmU Traducción realizada con la versión gratuita del traductor www.DeepL.com/Translator

Hello! Tell us ,please,what mode did your install firmware in?Normal or updated?

Hi! Have you activated the key succesfully?

Hi! What Windows OS is on your computer? You should try installing from another computer.

Hi! You should install the chipless firmware in NORMAL mode instead of UPDATE mode. Please read the instruction from our website carefully: https://inkchip.net/download/INKCHIP Instruction Method 14 (for 99 firmware).pdf Also, please watch the video guide from our official YouTube channel: https://youtu.be/oF0DsDVPT7k Let me know the result! Thank you!

Hi! We will update the firmware on the website for this model shortly.

Hi! What mode did you install the firmware in? Normal mode or update mode?

Hi! Unfortunately, we don't have any solution for your printer model.

Hi! Try this new firmware please: https://inkchip.net/download/INKCHIP.net_Firmware_99_WF7710_v1.rar install in the normal mode

Hi! Tell me please which mode have you been trying to install firmware in?

Try disconnecting the wireless connection. Use a valid USB cable, try using a different USB port on the computer.

Hi! This might be because of your bad internet connection. Check the usb connection as well

Hi! please contact our support team via this email: support@inkchip.net and describe your problem, they will specifically help you

Hi! What error occurs after you enter the key in this field? Can you send a screenshot of the error?

¡Hola! El hecho es que el firmware sin chip es una solución de cartucho, no tiene conexión con la caja de mantenimiento. No podemos garantizar que el firmware sin chip también reinicie los contadores de tinta. Para ello, deberá ponerse en contacto con un centro de servicio técnico.

Please tell me what mode did you install the firmware in? Normal mode or update mode? Also this might be because there are too many printers on devices and printers. That’s what might help you: close the Activator Software, turn off your printer, go to PC and remove all printers that may be in ""Devices and Printers"", then turn your printer on and it will install again, then open the launcher software again and it might appear normally.

Please tell me your printer model. Also please tell me what mode did you install the firmware in? Normal mode or update mode? Also this might be because there are too many printers on devices and printers. That’s what might help you: close the Activator Software, turn off your printer, go to PC and remove all printers that may be in ""Devices and Printers"", then turn your printer on and it will install again, then open the launcher software again and it might appear normally.

Hi! Have you followed all the instructions for using WIC, including installing Microsoft C++ packages before running the utility? Also, your printer seems to have internal problems, because WIC has nothing to do with other parts of the printer other than the maintenance box.

¡Buen día! Envíe una captura de pantalla