Admin

Are you using USB connection to the printer? In which mode did you install the firmware? Normal mode or update mode? Is there only one printer connected to your computer?

Hello! You should install the chipless firmware in NORMAL mode instead of UPDATE mode. Please read the instruction from our website carefully: https://inkchip.net/download/INKCHIP Instruction Method 14 (for 99 firmware).pdf Also, please watch the video guide from our official YouTube channel:

Perform a chipless firmware installation on a computer with an earlier version of Windows.

Hello, Unfortunately no. You can see the full list of supported models here: https://inkchip.net/soft/ Your model is supported by the Waste Ink Counters reset utility. You can watch the video on our official YouTube channel to see how easy it is to use: You can download the WIC reset utility in one of five languages at https://inkchip.net/wic/ You can buy a reset key at the following link: https://inkchip.net/price/ Choose the number of WIC keys and place an order.

Hello, This might be because there are too many printers on devices and printers. That’s what might help you: close the Activator Software, turn off your printer, go to PC and remove all printers that may be in "Devices and Printers", then turn your printer on and it will install again, then open the launcher software again and it might appear normally.

Hello! Please send me the screenshot from the download menu so that I can check if the correct Microsoft Visual C++ were installed.

Please try to use this new activation program for you: https://inkchip.net/download/activation.rar

Hello, Send me the screenshot of the error please. Your firmware might have not installed correctly.

In the video guide it shows that you don't need it to load 100%. When the load gets stuck at 75-85%, that's okay! You will need to pull the cable out at that point and put it back in. Then turn the printer on just using the power button. Watch the video please: https://youtu.be/oF0DsDVPT7k

This might be because there are too many printers on devices and printers. That’s what might help you: close the Activator Software, turn off your printer, go to PC and remove all printers that may be in "Devices and Printers", then turn your printer on and it will install again, then open the launcher software again and it might appear normally.

This might be because there are too many printers on devices and printers. That’s what might help you: close the Activator Software, turn off your printer, go to PC and remove all printers that may be in "Devices and Printers", then turn your printer on and it will install again, then open the launcher software again and it might appear normally.

Olá! Uma vez que o firmware sem chipless tenha sido instalado, a acção é interminável. Não precisa de comprar as chaves novamente, a única coisa que precisa de fazer é não actualizar a versão do firmware da impressora após a instalação.

Tell me please, in which mode did you install the firmware?

Are you using USB connection to the printer? Is there only one printer connected to your computer?

Hello, You must install the firmware in normal mode. To install the firmware in normal mode means to use only the power button. Watch this video please: https://youtu.be/oF0DsDVPT7k Here’s the new firmware: https://inkchip.net/download/INKCHIP.net_Firmware_XP4100_v1.rar

Envíenos un correo electrónico, por favor: support@inkchip.net

Are you using USB connection to the printer? Is there only one printer connected to your computer?

Para extraer un archivo necesitas usar cualquier archivador. Le recomendamos que utilice WinRar para asegurarse de que todo funciona sin problemas

Para extraer un archivo necesitas usar cualquier archivador. Le recomendamos que utilice WinRar para asegurarse de que todo funciona sin problemas

Make sure there is nothing wrong with your USB cable and that your computer recognizes the USB connection to the printer.

Hello, Send me the screenshot please. You should press “activate online” and insert the key without spaces before and after in the pop-up window.

Hello, Yes, you have to install the firmware now. Watch this video please: https://youtu.be/oF0DsDVPT7k Here’s the Chipless firmware: https://inkchip.net/download/INKCHIP.net_Firmware_99_WF7710_v1.rar Have you bought the key?

Hello! It might be because there are too many printers on devices and printers. That’s what might help you: close the Activator Software, turn off your printer, go to PC and remove all printers that may be in ""Devices and Printers"", then turn your printer on and it will install again, then open the launcher software again and it might will appear normally.

¡Hola! Escríbanos a support@inkchip.net sobre esta pregunta.

Nos alegra mucho oírlo.