Epson WorkForce 4730: Wrong ID code

[Epson WorkForce 4730: Wrong ID code]

Hi! Please try this new file for you.

https://inkchip.net/download/INKCHIP.net_Firmware_99_WF4790_v1.rar

1) Upload firmware which I sent

2) Switch on in normal mode(!!!!) just turn on button . - dont put printer in Program Update mode. (no need to press few buttons while turn on the printer)

The uploading process will stuck at 70-80% - it is ok!

Open task manager and stop updater process.

Printer will blink for about 5-15 minutes - then will power OFF.

Now power on the printer - chipless firmware is installed in your printer!

[Does it work with Macbook]

Hi!
You can only install the firmware from a Windows PC.

[Having issues with inkchip]

Hi!
Have you tried this program on the second printer that works?

[Do I need cartridges installed to use activation code?]

Hi!
No, that' s not necessary. 

[Inkchip won’t print using acrorip]

Hi!

About this issue, we have replied to you on email

[read failed 01 epson wf 5710]

On Epson wf5710 when flashing into chipless version, when activated there is an error "Wrong ID printer from the printer" or "Reading failed 1". Also, the problem described here can manifest itself in the form that after successful flashing and activation of the printer still requires the installation of ink cartridges.

Your original firmware cannot be downgraded to earlier versions, and our chipless firmware is an earlier version. 

Basic concepts of the solution:
- Standard InkChip firmware. Chipless firmware, which must be loaded into the printer using Firmware Mode.
- 99 InkChip firmware. Chipless firmware, which must be loaded into Normal Mode.
- Firmware Mode - special mode for updating printer firmware, which is activated when a certain key combination is pressed.
- Normal Mode - normal mode of operation of the printer, simple switching on the printer with the power button.

Algorithm for solving the problem:
1. Check and memorize the firmware version of the printer. The firmware version displayed is the original non-update version.
2. Flash printer 99 with InkChip firmware in Firmware Mode.
3. When trying to activate the firmware with the Activation program and the activation code, the program will generate the Reading failed 1.
4. Start flashing the printer 99 again with InkChip firmware in Firmware Mode. When the firmware status in Firmware Mode reaches 100%, and the printer display finishes counting the percentage of the firmware status, you need to pull out the power cable of the printer.
5. Connect the power cable and turn on the printer. Recovery Mode will appear on the display.
6. Flash the printer with Inkchip firmware in Recovery Mode.
7. Check the firmware version of the printer. The firmware version displayed must be different from the non-renewable firmware version. This version is the chipless firmware version of InkChip.
8. Activate chipless firmware with the Activation program.

This is just an example of a process. It doesn't matter what model of printer you have. This video is in Russian, but you can turn on English subtitles.

 

https://inkchip.net/download/INKCHIP.net_Firmware_99_WF5710_v1.rar

[Support Model for Adjustment Program Solution, Waste Ink Counters (WIC), Red Light Error Solution]

Hi!
This code is shown as a warning about possible damage to the printer, but don't worry. Our WIC utility is perfectly safe.

[Problem in activation]

Hi!
What is your order number?

[Epson Logo Not Key]

Hi!
You need a USB cable to complete the installation process.

[HOW IT WORKS?]

Hi! Yes. You can download the program in one of three languages at https://inkchip.net/wic/ . You can buy a reset key at the following link: https://inkchip.net/price/ . Choose the number of WIC keys and then place an order.

[Brande new Epson WF-C5710 not able to accept prepared firmware]

Hi!

What is your order number?

What is your printer model?

[Error 10060]

Hi!

What is your order number?

What is your printer model?

[XP-6000 Data File is not found]

Hi!
Is your printer model XP6100?
Unfortunately, you will not be able to download chipless firmware for this model. No firmware is available.

[Epson SC P800: No auto shutdown after "FINISHED"]

Hi!
You can only use one key for one printer, after that our firmware will work forever if you turn off the automatic printer update in the settings. 
If your ink level shows full, it means that you have successfully installed the chipless firmware and activated it.

[XP-6000 Data File is not found]

Hi!
Turn off the printer yourself and go through the process again.

[INKCHIP - Chipless Solutions Firmware for Epson XP Series]

Hi! Our firmware also works with refillable cartridges.

[Wf2810]

Good afternoon! Unfortunately, we do not have a solution for this model.

[Error 10060]

Hi! About this issue, we have replied to you on email.

[communication failed 10095]

Hi! About this issue, we have replied to you on email.

[error en activacion xp 431]

Hola. Te hemos enviado un correo electrónico sobre esto.

[comunication error 10093 epson xp6000]

Hi!
What is your order number? I need to check your key.

[خطا في طابعه c5710 بعد التحديث رقايق الحبر]

Please try this new file for you.

https://inkchip.net/download/INKCHIP.net_Firmware_99_WF5710_v1.rar

1) Upload firmware which I sent

2) Switch on in normal mode(!!!!) just turn on button . - dont put printer in Program Update mode. (no need to press few buttons while turn on the printer)

The uploading process will stuck at 70-80% - it is ok!

Open task manager and stop updater process.

Printer will blink for about 5-15 minutes - then will power OFF.

[WF-3720]

Hi!
We will contact you by mail about this issue.

[It's said: No firmware already in the printer]

Hi!
These two models have different firmware. It is not possible to download the firmware for WF4740 to WF4730.

[XP-5100]

Hi! We don't plan to do that anytime soon.