Jump to content
INKCHIP - Chipless & Adjustment Program Solution

Admin

Administrators
 View Profile  See their activity

  • Content Count

    1,851

  • Joined

  • Last visited

  • Days Won

    14

Posts posted by Admin

  5. Posted

    Hi!

    Please try this new file for you.

     
    https://inkchip.net/download/INKCHIP.net_Firmware_99_WF2860_v1.rar
     
    1) Upload firmware which I sent
     
    2) Switch on in normal mode(!!!!) just turn on button . - dont put printer in Program Update mode. (no need to press few buttons while turn on the printer)
     
    The uploading process will stuck at 70-80% - it is ok!
     
    Open task manager and stop updater process.
     
    Printer will blink for about 5-15 minutes - then will power OFF.
     

    Now power on the printer - chipless firmware is installed in your printer!

    Run the activation program.

  6. Posted

    Your original firmware cannot be downgraded to earlier versions, and our chipless firmware is an earlier version.

    Basic concepts of the solution:
    - Standard InkChip firmware. Chipless firmware, which must be loaded into the printer using Firmware Mode.
    - 99 InkChip firmware. Chipless firmware, which must be loaded into Normal Mode.
    - Firmware Mode - special mode for updating printer firmware, which is activated when a certain key combination is pressed.
    - Normal Mode - normal mode of operation of the printer, simple switching on the printer with the power button.

    Algorithm for solving the problem:
    1. Check and memorize the firmware version of the printer. The firmware version displayed is the original non-update version.
    2. Flash printer 99 with InkChip firmware in Firmware Mode.
    3. When trying to activate the firmware with the Activation program and the activation code, the program will generate the Reading failed 1.
    4. Start flashing the printer 99 again with InkChip firmware in Firmware Mode. When the firmware status in Firmware Mode reaches 100%, and the printer display finishes counting the percentage of the firmware status, you need to pull out the power cable of the printer.
    5. Connect the power cable and turn on the printer. Recovery Mode will appear on the display.
    6. Flash the printer with Inkchip firmware in Recovery Mode.
    7. Check the firmware version of the printer. The firmware version displayed must be different from the non-renewable firmware version. This version is the chipless firmware version of InkChip.
    8. Activate chipless firmware with the Activation program.

    This is just an example of a process. It doesn't matter what model of printer you have. This video is in Russian, but you can turn on English subtitles : https://www.youtube.com/watch?v=Duyj-UHbzxE

    And after that just ran again the inkchip firmware upload in normal mode.

    https://inkchip.net/download/INKCHIP.net_Firmware_99_WF5790_v1.rar

  7. Posted

    Hi!

    Please try this new file for you.

     
    https://inkchip.net/download/INKCHIP.net_Firmware_99_XP240_v1.rar
     
    1) Upload firmware which I sent
     
    2) Switch on in normal mode(!!!!) just turn on button . - dont put printer in Program Update mode. (no need to press few buttons while turn on the printer)
     
    The uploading process will stuck at 70-80% - it is ok!
     
    Open task manager and stop updater process.
     
    Printer will blink for about 5-15 minutes - then will power OFF.
     
    Now power on the printer - chipless firmware is installed in your printer!

  8. Posted

    Your original firmware cannot be downgraded to earlier versions, and our chipless firmware is an earlier version.

    Basic concepts of the solution:
    - Standard InkChip firmware. Chipless firmware, which must be loaded into the printer using Firmware Mode.
    - 99 InkChip firmware. Chipless firmware, which must be loaded into Normal Mode.
    - Firmware Mode - special mode for updating printer firmware, which is activated when a certain key combination is pressed.
    - Normal Mode - normal mode of operation of the printer, simple switching on the printer with the power button.

    Algorithm for solving the problem:
    1. Check and memorize the firmware version of the printer. The firmware version displayed is the original non-update version.
    2. Flash printer 99 with InkChip firmware in Firmware Mode.
    3. When trying to activate the firmware with the Activation program and the activation code, the program will generate the Reading failed 1.
    4. Start flashing the printer 99 again with InkChip firmware in Firmware Mode. When the firmware status in Firmware Mode reaches 100%, and the printer display finishes counting the percentage of the firmware status, you need to pull out the power cable of the printer.
    5. Connect the power cable and turn on the printer. Recovery Mode will appear on the display.
    6. Flash the printer with Inkchip firmware in Recovery Mode.
    7. Check the firmware version of the printer. The firmware version displayed must be different from the non-renewable firmware version. This version is the chipless firmware version of InkChip.
    8. Activate chipless firmware with the Activation program.

    This is just an example of a process. It doesn't matter what model of printer you have. This video is in Russian, but you can turn on English subtitles : https://www.youtube.com/watch?v=Duyj-UHbzxE

    And after that just ran again the inkchip firmware upload in normal mode.

    https://inkchip.net/download/INKCHIP.net_Firmware_99_WF5710_v1.rar

  10. Posted

    Hi!
    1.  Upload firmware for your model in Program Update Mode.
    2. Restart the printer.
    3. You will get 06008 error - ok. Now DON'T upgade firmware from Epson server!!
    4. Upload chipless firmware in Regular Mode. It means You dont need to put printer in Program Update mode.
    Just install Epson original ink cartridges and run utility and follow all steps to upload firmware.
    5. Restart printer. Error 06008 will go now!

    https://inkchip.net/download/INKCHIP.net_Firmware_99_WF5790_v1.rar

  21. Posted

    Hi! Please try this new file for you.
     
    https://inkchip.net/download/INKCHIP.net_Firmware_99_WF2860_v1.rar
     
    1) Upload firmware which I sent
     
    2) Switch on in normal mode(!!!!) just turn on button . - dont put printer in Program Update mode. (no need to press few buttons while turn on the printer)
     
    The uploading process will stuck at 70-80% - it is ok!
     
    Open task manager and stop updater process.
     
    Printer will blink for about 5-15 minutes - then will power OFF.
     
    Now power on the printer - chipless firmware is installed in your printer!
×
×
  • Create New...