Admin

The original firmware of your printer cannot be downgraded to earlier version. Please, follow the instructions below. The firmware, which you need to use: https://inkchip.net/download/INKCHIP.net_Firmware_99_WF5890_v1.rar Algorithm for solving the problem: 1) Check and memorize current firmware version of your printer. 2) Start installing the firmware in the Firmware Mode (by pressing a certain button combinations) 3) When the firmware installation reaches 100% you need to disconnect the power cable from your printer. Wait for about 10 seconds and then plug the cable in. A message will appear on your printer screen, saying that the printer is in Recovery Mode. 4) Start installing the Inkchip firmware again, wait for the firmware to load, your printer will shut down. Turn your printer on. 5) Check your printer's firmware version. It must be different. This means that the process was successful. 6) Now you need to use the Activation Program from our website and activate it with the key. After the activation you have to reboot your printer. The chipless firmware is installed on your printer! Please watch the instruction video from our YouTube channel for a clear explanation: https://www.youtube.com/watch?v=h7qWYWjMNFQ This is just an example of the process, it does not matter which model of printer you have.

Hello! What do you mean? You can make it chipless whenever you need, the only thing you need to have cartridges inside during the activation procedure.

Make sure you used a usb cable when installing the firmware and have a stable internet, are you? Go to the menu devices and printers and check if the computer sees the connection to the printer.

Hi! In the video guide it shows that you don't need it to load 100%. When the load gets stuck at 75-90%, that's okay! You will need to pull the cable out at that point and put it back in. Then turn the printer on just using the power button. Watch the video please:

The Epson error code 032051 typically indicates an issue with the printhead or ink system. Here's a step-by-step guide to resolve it: Restart the Printer: Turn off, unplug for 5 minutes, then restart. Check Ink Cartridges: Ensure they are seated properly and not empty. Replace if needed. Clean Printhead: Use the printer’s maintenance menu to perform a cleaning.

Hello! Here are some possible reasons why your printer prints blank forms after activating the firmware: https://youtu.be/my58sHb9z5k

Not guaranteed.

The latest version is loaded on the site. Make sure you followed the procedure correctly and installed firmware successfully.

Hello! You must install the firmware in normal mode. To install the firmware in normal mode means to use only the power button. Watch this video please: https://youtu.be/oF0DsDVPT7k

Hello! You should install the Chipless Firmware in NORMAL mode instead of UPDATE mode. Please read the instruction from our website carefully: https://inkchip.net/download/INKCHIP Instruction Method 14 (for 99 firmware).pdf Also, please watch the video guide from our official YouTube channel: https://youtu.be/oF0DsDVPT7k

Desafortunadamente, no tenemos firmware sin chip para este modelo de impresora, pero este modelo es compatible con la utilidad de reinicio de Contadores de Tinta Residual. Puedes ver el vídeo en nuestro canal oficial de YouTube para ver lo fácil que es de usar: https://youtu.be/VSgxJvVKV_k Puede descargar la utilidad de reinicio de WIC en uno de los cinco idiomas en https://inkchip.net/wic/ Puede comprar una clave de restablecimiento en el siguiente enlace: https://inkchip.net/price/ Elija el número de llaves WIC y haga el pedido.

Please try this updated file with the Chipless Firmware: https://inkchip.net/download/INKCHIP.net_Firmware_XP230_v3.rar 1) Upload the Chipless Firmware which is attached above. 2) Turn on the printer in the NORMAL MODE (using only the power button). Do not put the printer in the UPDATE MODE. The loading process will get stuck at 75-85% - that is OK. 3) With the use of the task manager stop the loading process. Printer will blink for about 5-15 minutes . It should then turn off automatically. 4) Now turn on the printer - Chipless Firmware should be installed! 5) Run the Activation Software to insert your Activation Key.

Stop the boot process at 75-85% through the task manager. Don’t let it get 99% and error.

You have to input your Activation Key into SN field.

Make sure that Microsoft Visual C++ x64 and x86 packages are version 2017-2022, but not earlier. Make sure the program is reloaded and no longer hangs.

Hello! What difficulties exactly do you have? Please, describe it and send a screenshot. Thank you!

You should convince that installed the Chipless Firmware in NORMAL mode instead of UPDATE mode. Please read the instruction from our website carefully: https://inkchip.net/download/INKCHIP Instruction Method 14 (for 99 firmware).pdf Also, please watch the video guide from our official YouTube channel: https://youtu.be/oF0DsDVPT7k Let me know the result! Thank you!

You need to put it in the pop up window after the clicking on the activation online button. Please,watch the video instruction attentively and follow all the steps. https://youtu.be/oF0DsDVPT7k

¡Hola! Puede comprar una clave a través de nuestra página web en el menú "comprar". Elija la serie de impresoras, el modelo de impresora y el número de claves que necesita. Desde aquí puede hacer su pedido. Puede pagarlo con tarjeta bancaria o a través de PayPal, AliPay. Haga clic en el enlace: https://inkchip.net/price/

Hello! Please try to come back to original firmware version and then recover code with the recovery code.

Unfortunately, we do not have a solution for this model. Follow our site for new updates. https://inkchip.net/

Hello! Start the Chipless firmware installation in Normal Mode (pressing the power button). Don’t put the printer in Update Mode with key combination.

Hello! Could you please send a video of installation process to support@inkchip.net?

Hello! Yes! This printer model is supported by the WIC Reset Utility. You can download the WIC Reset Utility in one of five languages at https://inkchip.net/wic/ You can buy a WIC Reset Key at the following link: https://inkchip.net/price/ Choose the number of WIC Reset Keys and proceed to checkout.

Hello! We have already responded to you by email on this issue.