Epson WF2865 unable to update

[luis 0]

Hi!

I can't install the firmware on my Epson WF2865

I have installed the software and purchased the activation key as indicated in the instructions, but I cannot proceed from step 5 of the firmware application. It says it's out of date and is impossible to update.

I've already checked the USB cable, I've tried several ports on the computer, I've checked if I had downloaded the right one for my printer, turned it on and off several times but the situation doesn't change, it does not let me select the printer....

Can you help me please?

[luis 0]

15 hours ago, luis said:

Hi!

I can't install the firmware on my Epson WF2865

I have installed the software and purchased the activation key as indicated in the instructions, but I cannot proceed from step 5 of the firmware application. It says it's out of date and is impossible to update.

I've already checked the USB cable, I've tried several ports on the computer, I've checked if I had downloaded the right one for my printer, turned it on and off several times but the situation doesn't change, it does not let me select the printer....

Can you help me please?

[Admin 17]

9 minutes ago, luis said:

Your original firmware cannot be downgraded to earlier versions, and our chipless firmware is an earlier version.

 

Basic concepts of the solution:

- Standard InkChip firmware. Chipless firmware, which must be loaded into the printer using Firmware Mode.

- 99 InkChip firmware. Chipless firmware, which must be loaded into Normal Mode.

- Firmware Mode - special mode for updating printer firmware, which is activated when a certain buttons combination is pressed.

- Normal Mode - normal mode of operation of the printer, simple switching on the printer with the power button.

 

Algorithm for solving the problem:

1. Check and memorize the firmware version of the printer. The firmware version displayed is the original non-update version.

2. Flash printer 99 with InkChip firmware in Firmware Mode.

3. When trying to activate the firmware with the Activation program and the activation code, the program will generate the Reading failed 1.

4. Start flashing the printer 99 again with InkChip firmware in Firmware Mode. When the firmware status in Firmware Mode reaches 100%, and the printer display finishes counting the percentage of the firmware status, you need to pull out the power cable of the printer.

5. Connect the power cable and turn on the printer. Recovery Mode will appear on the display.

6. Flash the printer with Inkchip firmware in Recovery Mode.

7. Check the firmware version of the printer. The firmware version displayed must be different from the non-renewable firmware version. This version is the chipless firmware version of InkChip.

8. Activate chipless firmware with the Activation program.

 

https://inkchip.net/download/INKCHIP.net_Firmware_99_WF2860_v1.rar

 

This is just an example of a process, it doesn't matter what model of printer you have.

 

Please watch the video on our official YouTube channel: https://www.youtube.com/watch?v=h7qWYWjMNFQ

 

And after that just ran again the inkchip firmware upload in normal mode.