Jump to content
Sign in to follow this  
Jessica31284

WF2850 Won't fully update gets to 99% and then says update failed

Recommended Posts

I followed all the steps I get the firmware to 99% and then it says failed, My activation code is reading that it cant be rexcognized and I dont know what to do at this point

Share this post


Link to post
Share on other sites

In the video guide it shows that you don't need it to load 100%. When the load gets stuck at 75-85%, that's okay! You will need to pull the cable out at that point and put it back in.

Then turn the printer on just using the power button.

Watch the video please:

 

https://youtu.be/oF0DsDVPT7k

Share this post


Link to post
Share on other sites

I am having similar issues. I used the above video for reference. The installation gets to 99% before the error code pops up. 
 

-the usb cable is not connected

- the wi-fi Ethernet connection to your printer was lost.

the printer is powered off.

i am using a usb cable. I do not have the printer(espon xp15000) connected to the wifi.

the print is on. But was idle so the screen did power down.

thank you in advance for any recommendations. 

Share this post


Link to post
Share on other sites

Watch the video please:

In the video guide it shows that you don't need it to load 100%. When the load gets stuck at 75-85%, that's okay! You will need to pull the cable out at that point and put it back in.

 

Then turn the printer on just using the power button.

 

Watch the video please:

 

 https

https://youtu.be/oF0DsDVPT7k

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...