Epson WF2840 Firmware stalls at 71%

[Kerry 0]

I bought the Inkchip firmware for Epson WF2830 I have tried to install it for the last 2 days. 

It stalls ar around 71%

I think it might be because I have updated Epson firmware which stops the Inkchip firmware from installing

I have changed cables, restarted, reinstalled printer, you name it I have given it a go, Closed anti virus, searched the internet for ideas. 

I am really frustrated is there anyone out there that might have a solution

 

[Kerry 0]

I should have said I have an Epson WF2830.

I notice on my printer it says "A newfirmware is released; Update the firmware from setup menu.

But I have stopped any new firmware in my setup

[Admin 16]

In which mode did you install the firmware? In normal mode or update mode?

Please send me a screenshot of the error so I can help you.

[Julius0007 0]

My WF2830 as well. The printer will restart at 71%.. The original firmware of my printer is AL05K3. 

 

[Admin 16]

3 hours ago, Julius0007 said:

My WF2830 as well. The printer will restart at 71%.. The original firmware of my printer is AL05K3. 

 

In the video guide it shows that you don't need it to load 100%. When the load gets stuck at 70-80%, that's okay! You will need to pull the cable out at that point and put it back in.

Then turn the printer on just using the power button.

Watch the video please:

 

 

 

[Bkbk 0]

I’m still having an issue. I’m doing it via Wi-Fi network connection. Is the USB cord the only way?

[Admin 16]

On 8/12/2022 at 5:24 PM, Bkbk said:

I’m still having an issue. I’m doing it via Wi-Fi network connection. Is the USB cord the only way?

Yes, of course. Disable your network connection to the computer. Use ISB cable only.