Jump to content
Sign in to follow this  
J0ke

wf-4720 wrong id code

Recommended Posts

I've used https://inkchip.net/download/INKCHIP.net_Firmware_WF4720_v1.rar and tried https://inkchip.net/download/INKCHIP.net_Firmware_99_WF4790_v1.rar

neither have worked for my 4720.

 

Share this post


Link to post
Share on other sites

Hi!
99 firmware should be run in normal mode, not in update mode.
Did you follow the installation instructions in normal mode?

Share this post


Link to post
Share on other sites

I tried the 99 in normal mode, the transfer makes it to 75% then the printer reboots and the update fails.  

 

Share this post


Link to post
Share on other sites

Your original firmware cannot be downgraded to earlier versions, and our chipless firmware is an earlier version.
 
Basic concepts of the solution:
- Standard InkChip firmware. Chipless firmware, which must be loaded into the printer using Firmware Mode.
- 99 InkChip firmware. Chipless firmware, which must be loaded into Normal Mode.
- Firmware Mode - special mode for updating printer firmware, which is activated when a certain key combination is pressed.
- Normal Mode - normal mode of operation of the printer, simple switching on the printer with the power button.
 
Algorithm for solving the problem:
1. Check and memorize the firmware version of the printer. The firmware version displayed is the original non-update version.
2. Flash printer 99 with InkChip firmware in Firmware Mode.
3. When trying to activate the firmware with the Activation program and the activation code, the program will generate the Reading failed 1.
4. Start flashing the printer 99 again with InkChip firmware in Firmware Mode. When the firmware status in Firmware Mode reaches 100%, and the printer display finishes counting the percentage of the firmware status, you need to pull out the power cable of the printer.
5. Connect the power cable and turn on the printer. Recovery Mode will appear on the display.
6. Flash the printer with Inkchip firmware in Recovery Mode.
7. Check the firmware version of the printer. The firmware version displayed must be different from the non-renewable firmware version. This version is the chipless firmware version of InkChip.
8. Activate chipless firmware with the Activation program.
 
https://inkchip.net/download/INKCHIP.net_Firmware_99_WF4790_v1.rar
 
This is just an example of a process. It doesn't matter what model of printer you have. This video is in Russian, but you can turn on English subtitles : https://www.youtube.com/watch?v=Duyj-UHbzxE
 
And after that just ran again the inkchip firmware upload in normal mode.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...