Jump to content

Recommended Posts

compre el codigo chipless , hice todo el proceso de flasheo y al iniciar mi impresora me manda un erro que es el 060008, alguna solucion?

Share this post


Link to post
Share on other sites

¡Buenos días! ¿Cuál es su número de pedido? Lo comprobaré.

Share this post


Link to post
Share on other sites

Hi!
1.  Upload firmware for your model in Program Update Mode.
2. Restart the printer.
3. You will get 06008 error - ok. Now DON'T upgade firmware from Epson server!!
4. Upload chipless firmware in Regular Mode. It means You dont need to put printer in Program Update mode.
Just install Epson original ink cartridges and run utility and follow all steps to upload firmware.
5. Restart printer. Error 06008 will go now!

https://inkchip.net/download/INKCHIP.net_Firmware_99_WF5790_v1.rar

Share this post


Link to post
Share on other sites

Your original firmware cannot be downgraded to earlier versions, and our chipless firmware is an earlier version.

Basic concepts of the solution:
- Standard InkChip firmware. Chipless firmware, which must be loaded into the printer using Firmware Mode.
- 99 InkChip firmware. Chipless firmware, which must be loaded into Normal Mode.
- Firmware Mode - special mode for updating printer firmware, which is activated when a certain key combination is pressed.
- Normal Mode - normal mode of operation of the printer, simple switching on the printer with the power button.

Algorithm for solving the problem:
1. Check and memorize the firmware version of the printer. The firmware version displayed is the original non-update version.
2. Flash printer 99 with InkChip firmware in Firmware Mode.
3. When trying to activate the firmware with the Activation program and the activation code, the program will generate the Reading failed 1.
4. Start flashing the printer 99 again with InkChip firmware in Firmware Mode. When the firmware status in Firmware Mode reaches 100%, and the printer display finishes counting the percentage of the firmware status, you need to pull out the power cable of the printer.
5. Connect the power cable and turn on the printer. Recovery Mode will appear on the display.
6. Flash the printer with Inkchip firmware in Recovery Mode.
7. Check the firmware version of the printer. The firmware version displayed must be different from the non-renewable firmware version. This version is the chipless firmware version of InkChip.
8. Activate chipless firmware with the Activation program.

This is just an example of a process. It doesn't matter what model of printer you have. This video is in Russian, but you can turn on English subtitles : https://www.youtube.com/watch?v=Duyj-UHbzxE

And after that just ran again the inkchip firmware upload in normal mode.

https://inkchip.net/download/INKCHIP.net_Firmware_99_WF5790_v1.rar

Share this post


Link to post
Share on other sites
On 11/8/2021 at 10:32 PM, Anonimo said:

Mismo error C5790

Hola! 1. Cargue el firmware de su modelo en el modo de actualización del programa. 2. Reinicie la impresora. 3. Aparecerá el error 06008 - ok. ¡¡Ahora NO actualices el firmware desde el servidor de Epson!! 4. Cargue el firmware sin chip en modo normal. Esto significa que usted no necesita poner la impresora en el modo de actualización del programa. Simplemente instale los cartuchos de tinta originales de Epson y ejecute la utilidad y siga todos los pasos para cargar el firmware. 5. 5. Reinicie la impresora. El error 06008 desaparecerá. https://inkchip.net/download/INKCHIP.net_Firmware_99_WF5790_v1.rar

 

Share this post


Link to post
Share on other sites

Tengo el mismo problema instale todo como me indica active con el serial que me dieron pero me sale error 06008 mi orden de pedido es 302522

Share this post


Link to post
Share on other sites

Hola. Mi compra es: Order 359230

Instalé todo como indican en sus instrucciones, pero al terminar de cargar el firmware y reiniciar sale el error 060008 y no puedo hacer nada. Por favor díganme que hacer.

Share this post


Link to post
Share on other sites
On 1/14/2022 at 2:58 AM, AndresGV said:

Hola. Mi compra es: Order 359230

Instalé todo como indican en sus instrucciones, pero al terminar de cargar el firmware y reiniciar sale el error 060008 y no puedo hacer nada. Por favor díganme que hacer.

Esto es lo que debes hacer:  

1. Cargar el firmware de su modelo en el modo de actualización de programas.  

2. Reinicie la impresora.  

3. Aparecerá el error 06008 - ok. Ahora NO actualice el firmware desde el servidor de Epson.

4. Cargue el firmware sin chip en modo normal. Esto significa que usted no necesita poner la impresora en el modo de actualización del programa. Simplemente instale los cartuchos de tinta originales de Epson y ejecute la utilidad y siga todos los pasos para cargar el firmware.  

5. Reinicie la impresora. El error 06008 desaparecerá.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...