Jump to content

Recommended Posts

On 12/16/2021 at 2:19 PM, dimon26072001 said:

Please help me on my XP-434, we have the same problem

Please try this new file for you.
 
https://inkchip.net/download/INKCHIP.net_Firmware_99_XP430_v1.rar
 
1) Upload firmware which I sent
 
2) Switch on in normal mode(!!!!) just turn on button . - dont put printer in Program Update mode. (no need to press few buttons while turn on the printer)
 
The uploading process will stuck at 70-80% - it is ok!
 
Open task manager and stop updater process.
 
Printer will blink for about 5-15 minutes - then will power OFF.
 
Now power on the printer - chipless firmware is installed in your printer!

Share this post


Link to post
Share on other sites

Please help me on my XP-340, we have the same problem. I get the Read Failed -1 when I try to use the activation program.

 

 

Share this post


Link to post
Share on other sites

Epson WF 2830

Updated the firmware last night and bam. Not allowing my aftermarket print cartridges to be recognized anymore. Found Ink-chip.net,, Downloaded the Chip-less firmware and activation software.  When I go to install the firmware software it comes back with error "( Could not find files to start)".  Whats up with this?  Id like to fix my printer but it seems like this is a 1/2 written program and not working well for anyone.  Current firmware version on Epson WF2830 is AL2213.  Any help would be appreciated.

Share this post


Link to post
Share on other sites
22 hours ago, JIMEA said:

Epson WF 2830

Updated the firmware last night and bam. Not allowing my aftermarket print cartridges to be recognized anymore. Found Ink-chip.net,, Downloaded the Chip-less firmware and activation software.  When I go to install the firmware software it comes back with error "( Could not find files to start)".  Whats up with this?  Id like to fix my printer but it seems like this is a 1/2 written program and not working well for anyone.  Current firmware version on Epson WF2830 is AL2213.  Any help would be appreciated.

Hello!

To extract a file you need to use any archiver. For example, WinRAR or other unzipping program.

Share this post


Link to post
Share on other sites
On 6/4/2022 at 8:40 PM, helen said:

hi i am having the read-1 error when pressing activate online with my wf-2850

please help 

 

Please try this new file:

 

https://inkchip.net/download/INKCHIP.net_Firmware_99_WF2850_v1.rar

 

 

1) Upload firmware which I sent. 

2) Switch on in normal mode(!!!) just turn on button . - dont put printer in Program Update mode.

 (No need to press few buttons while turn on the printer) 

The uploading process will stuck at 70-80% - it is ok! Open task manager and stop updater process. Printer will blink for about 5-15 minutes - then will power OFF. 

Now power on the printer - chipless firmware is installed in your printer!

 

After that try to activate again.

Share this post


Link to post
Share on other sites

Hello! Please try this new file for you:

 

 

https://inkchip.net/download/INKCHIP.net_Firmware_XP4100_v1.rar

 

1) Upload firmware which I sent.

2) Switch on in normal mode(!!!) just turn on button . - dont put printer in Program Update mode. (No need to press few buttons while turn on the printer) The uploading process will stuck at 70-80% - it is ok! Open task manager and stop updater process. Printer will blink for about 5-15 minutes - then will power OFF.

Now power on the printer - chipless firmware is installed in your printer!

 

 

 

 

 

After that try to activate again 

Share this post


Link to post
Share on other sites
On 6/17/2022 at 3:01 AM, Admin said:

Hello! Please try this new file for you:

 

 

https://inkchip.net/download/INKCHIP.net_Firmware_XP4100_v1.rar

 

1) Upload firmware which I sent.

2) Switch on in normal mode(!!!) just turn on button . - dont put printer in Program Update mode. (No need to press few buttons while turn on the printer) The uploading process will stuck at 70-80% - it is ok! Open task manager and stop updater process. Printer will blink for about 5-15 minutes - then will power OFF.

Now power on the printer - chipless firmware is installed in your printer!

 

 

 

 

 

After that try to activate again 

Im sorry this does not make sense.

It will not update the firmware when it is in Normal mode. 

Please advise

Share this post


Link to post
Share on other sites

Hello! Please try this new file for you:  

https://inkchip.net/download/INKCHIP.net_Firmware_XP4100_v1.rar

  

1) Upload firmware which I sent.

2) Switch on in normal mode(!!!) just turn on button . - dont put printer in Program Update mode. (No need to press few buttons while turn on the printer) The uploading process will stuck at 70-80% - it is ok! Open task manager and stop updater process. Printer will blink for about 5-15 minutes - then will power OFF.

Now power on the printer - chipless firmware is installed in your printer!

After that try to activate again   

  

  

Share this post


Link to post
Share on other sites

My printer is the XP-2150. The firmware program always gets stuck at 99% even if I unplug the printer then turn it back on. I always run it on regular mode and the program on administrator mode with antivirus turned off. This makes no sense..

Share this post


Link to post
Share on other sites
11 hours ago, van said:

My printer is the XP-2150. The firmware program always gets stuck at 99% even if I unplug the printer then turn it back on. I always run it on regular mode and the program on administrator mode with antivirus turned off. This makes no sense..

Hello!

 

Please try this new file : 

 

https://inkchip.net/download/INKCHIP.net_Firmware_99_XP2100_v1.rar

 

1) Upload firmware which I sent. 

2) Switch on in normal mode(!!!) just turn on button . - dont put printer in Program Update mode.

 (No need to press few buttons while turn on the printer) 

The uploading process will stuck at 70-80% - it is ok! Open task manager and stop updater process. Printer will blink for about 5-15 minutes - then will power OFF. 

Now power on the printer - chipless firmware is installed in your printer!

 

After that try to activate again.

Share this post


Link to post
Share on other sites
19 hours ago, Moacir said:

Estou com problema na Epson xp-231, gostaria de uma solução. Não está dando certo.

da erro de leitura.

 

Hello,

Describe your problem in details please. Send the screenshot, if possible.

Share this post


Link to post
Share on other sites
23 hours ago, andrewj320 said:

I also have the same problem on epson xp 15000 

Hello!

Please try this new file:

https://inkchip.net/download/INKCHIP.net_Firmware_99_XP15000_v1.rar

 

1) Upload firmware which I sent

 

2) Switch on in normal mode(!!!!) just turn on button . - dont put printer in Program Update mode. (no need to press few buttons while turn on the printer)

 

The uploading process will stuck at 70-80% - it is ok!

 

Open task manager and stop updater process.

 

Printer will blink for about 5-15 minutes - then will power OFF.

 

Now power on the printer - chipless firmware is installed in your printer!

Share this post


Link to post
Share on other sites

I have the same problem to my XP-235 series. I tried the firmware and thru the program update mode. Then in activation, it says read failed -1.

I tried then with your process doing it normally not on program update mode, but the firmware can't install be installed. 

 

https://www.dropbox.com/s/qrbj69mpxsnzmhy/Screenshot%202022-11-23%20140635.png?dl=0

 

https://www.dropbox.com/s/qexei5wa6b4964r/Screenshot%202022-11-23%20140743.png?dl=0

Share this post


Link to post
Share on other sites
On 11/23/2022 at 7:09 AM, John Ovid said:

I have the same problem to my XP-235 series. I tried the firmware and thru the program update mode. Then in activation, it says read failed -1.

I tried then with your process doing it normally not on program update mode, but the firmware can't install be installed. 

 

https://www.dropbox.com/s/qrbj69mpxsnzmhy/Screenshot 2022-11-23 140635.png?dl=0

 

https://www.dropbox.com/s/qexei5wa6b4964r/Screenshot 2022-11-23 140743.png?dl=0

Hello!

Please try this updated file with the Chipless Firmware:

 

https://inkchip.net/download/INKCHIP.net_Firmware_99_XP235_v1.rar

 

1) Upload the Chipless Firmware which is attached above.

 

2) Turn on the printer in the NORMAL MODE (using only the power button). Do not put the printer in the UPDATE MODE.

 

The loading process will get stuck at 75-85% - that is OK.

 

3) With the use of the task manager stop the loading process.

 

Printer will blink for about 5-15 minutes . It should then turn off automatically.

 

4) Now turn on the printer - Chipless Firmware should be installed!

 

5) Run the Activation Software to insert your Activation Key.

 

Let me know the result!

Thanks!"

Share this post


Link to post
Share on other sites
On 11/25/2022 at 1:32 AM, Admin said:

Hello!

Please try this updated file with the Chipless Firmware:

 

https://inkchip.net/download/INKCHIP.net_Firmware_99_XP235_v1.rar

 

1) Upload the Chipless Firmware which is attached above.

 

2) Turn on the printer in the NORMAL MODE (using only the power button). Do not put the printer in the UPDATE MODE.

 

The loading process will get stuck at 75-85% - that is OK.

 

3) With the use of the task manager stop the loading process.

 

Printer will blink for about 5-15 minutes . It should then turn off automatically.

 

4) Now turn on the printer - Chipless Firmware should be installed!

 

5) Run the Activation Software to insert your Activation Key.

 

Let me know the result!

Thanks!"

Hello. I have tried the above method, but still,  it says reading failed. The moment I use the activation software. Also, the normal mode does not work. It gets stuck as early as 14% and says that it does not detect the printer (unless in UPDATE MODE). Is there any workaround regarding this problem?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...