Jump to content

Recommended Posts

Hi! I uploaded the firmware from your website and it's not working.  Rading failed 1 appears on the screen and I can't activate the key.

WhatsApp Image 2020-06-17 at 10.19.29.jpeg

Share this post


Link to post
Share on other sites

Please try this new file for you.

https://inkchip.net/download/INKCHIP.net_Firmware_99_XP240_v1.rar

1) Upload firmware which I sent

2) Switch on in normal mode(!!!!) just turn on button . - dont put printer in Program Update mode. (no need to press few buttons while turn on the printer)

The uploading process will stuck at 70-80% - it is ok!

Open task manager and stop updater process.

Printer will blink for about 5-15 minutes - then will power OFF.

Now power on the printer - chipless firmware is installed in your printer!

Share this post


Link to post
Share on other sites

Please try this new file for you.
 
https://inkchip.net/download/INKCHIP.net_Firmware_99_WF5790_v1.rar
 
 
 
1) Upload firmware which I sent
 
2) Switch on in normal mode(!!!!) just turn on button . - dont put printer in Program Update mode. (no need to press few buttons while turn on the printer)
 
The uploading process will stuck at 70-80% - it is ok!
 
Open task manager and stop updater process.
 
Printer will blink for about 5-15 minutes - then will power OFF.
 
Now power on the printer - chipless firmware is installed in your printer!

Share this post


Link to post
Share on other sites

Hola

Por favor, pruebe este nuevo archivo para usted.

 
https://inkchip.net/download/INKCHIP.net_Firmware_99_XP430_v1.rar
 
1) Subir el firmware que envié
 
2) Encienda en el modo normal (!!!!) sólo encienda el botón . - No pongas la impresora en el modo de actualización del programa. (No hay necesidad de presionar algunos botones mientras se enciende la impresora)
 
El proceso de carga se atascará en un 70-80% - ¡está bien!
 
Abrir el administrador de tareas y detener el proceso de actualización.
 
La impresora parpadeará durante unos 5-15 minutos y luego se apagará.
 
Ahora enciende la impresora. ¡El firmware sin chip está instalado en tu impresora!

Share this post


Link to post
Share on other sites
On 6/30/2020 at 3:51 AM, Admin said:
Please try this new file for you.
 
https://inkchip.net/download/INKCHIP.net_Firmware_99_WF5790_v1.rar
 
 
 
1) Upload firmware which I sent
 
2) Switch on in normal mode(!!!!) just turn on button . - dont put printer in Program Update mode. (no need to press few buttons while turn on the printer)
 
The uploading process will stuck at 70-80% - it is ok!
 
Open task manager and stop updater process.
 
Printer will blink for about 5-15 minutes - then will power OFF.
 
Now power on the printer - chipless firmware is installed in your printer!

 

Hello, your instructions is not that clear. I am having the same problem with my epson workforce c5790.

Open task manager and stop updater process. >> About this one, should i close the process even if the update is not finished yet? as long as it reached the 70-80% of the update, i need to close it?

----
And I also tried your instruction, but at 67% mark, the printer restarted itself. it didnt even reach the 70 to 80% of the update

Share this post


Link to post
Share on other sites

1) Upload firmware from the website
 
2) Switch on in normal mode(!!!!) just turn on button . - dont put printer in Program Update mode. (no need to press few buttons while turn on the printer)
  • Confused 1

Share this post


Link to post
Share on other sites

Hola.

Por favor, pruebe este nuevo archivo para usted.

 
https://inkchip.net/download/INKCHIP.net_Firmware_99_XP15000_v1.rar
 
1) Subir el firmware que envié
 
2) Encienda en el modo normal (!!!!) sólo encienda el botón . - No pongas la impresora en el modo de actualización del programa. (No hay necesidad de presionar algunos botones mientras se enciende la impresora)
 
El proceso de carga se atascará en un 70-80% - ¡está bien!
 
Abrir el administrador de tareas y detener el proceso de actualización.
 
La impresora parpadeará durante unos 5-15 minutos y luego se apagará.
 
Ahora enciende la impresora. ¡El firmware sin chip está instalado en tu impresora!

Share this post


Link to post
Share on other sites

Hi,

I bought the WF-C5290 key and tried to follow the step you give ,

when activation online it showed reading failed - 1, I download the new firmware which you provide for other person who have same problem.

However, when I try to run the new firmware, it can not detect the printer unless I turn on the printer (with usual power bottom), when the printer is on it showed can not updated.

What should I do in this stage?

If you provide the new firmware link for me to download, when install the new firmware, should I turn on the printer or not?

Thank you.

Share this post


Link to post
Share on other sites
On 3/5/2021 at 6:09 PM, Elvie said:

Hi,

I bought the WF-C5290 key and tried to follow the step you give ,

when activation online it showed reading failed - 1, I download the new firmware which you provide for other person who have same problem.

However, when I try to run the new firmware, it can not detect the printer unless I turn on the printer (with usual power bottom), when the printer is on it showed can not updated.

What should I do in this stage?

If you provide the new firmware link for me to download, when install the new firmware, should I turn on the printer or not?

Thank you.

Hi! Your original firmware cannot be downgraded to earlier versions, and our chipless firmware is an earlier version.
 
Basic concepts of the solution:
- Standard InkChip firmware. Chipless firmware, which must be loaded into the printer using Firmware Mode.
- 99 InkChip firmware. Chipless firmware, which must be loaded into Normal Mode.
- Firmware Mode - special mode for updating printer firmware, which is activated when a certain buttons combination is pressed.
- Normal Mode - normal mode of operation of the printer, simple switching on the printer with the power button.
 
Algorithm for solving the problem:
1. Check and memorize the firmware version of the printer. The firmware version displayed is the original non-update version.
2. Flash printer 99 with InkChip firmware in Firmware Mode.
3. When trying to activate the firmware with the Activation program and the activation code, the program will generate the Reading failed 1.
4. Start flashing the printer 99 again with InkChip firmware in Firmware Mode. When the firmware status in Firmware Mode reaches 100%, and the printer display finishes counting the percentage of the firmware status, you need to pull out the power cable of the printer.
5. Connect the power cable and turn on the printer. Recovery Mode will appear on the display.
6. Flash the printer with Inkchip firmware in Recovery Mode.
7. Check the firmware version of the printer. The firmware version displayed must be different from the non-renewable firmware version. This version is the chipless firmware version of InkChip.
8. Activate chipless firmware with the Activation program.
 
https://inkchip.net/download/INKCHIP.net_Firmware_99_WF5290_v1.rar
 
This is just an example of a process. It doesn't matter what model of printer you have. This video is in Russian, but you can turn on English subtitles : https://www.youtube.com/watch?v=Duyj-UHbzxE
 
And after that just ran again the inkchip firmware upload in normal mode.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...